816254

Hikoki VB3616DA Manual

16
Zoom out
Zoom in
Previous page
1/192
Next page
16
English
PICTGRAPH ILLUSTRATION AND EXPLANATION
Warning label (Cutting)
Avoid bringing your hand near to the reaction stoppers during operation; otherwise,
you may get your fi nger caught in or may run the hazard of other injuries.
During cutting work, securely hook the rebar to the reaction stoppers. Furthermore,
secure enough length of a rebar to be hooked to the reaction stoppers.
Never bring your hand close to the cutter during operation.
Continued use of a worn-out cutter can result in the damage and the broken pieces
fl ying around. Replace it with a new cutter after approximately 8000 times of cutting
as a rough guide.
If the grip rubber gets worn out, there is a fear that it cannot suffi ciently hold the rebar
and gets broken down with its parts fl ying around, etc.
If the grip rubber cannot hold the rebar much longer, replace it with a new grip rubber.
Set the rebar in the center or the recess of the cutter during cutting work. Any cutting
work with the rebar set on corners or ends of the cutter can result in the pieces of
broken rebar fl ying around or the damage to the cutter and the machine.
Warning label (Bending)
If you bend the rebar with a large angle while placing your hand onto it, there is a fear
of getting your hand caught in by the fold-back reaction of the rebar.
Begin operation only after ensuring that there are no people within the turning range
of the material to be bent.
Warning label (Battery Cover)
Attach the battery cover when storing or operating the tool.
5. Removing and inserting the battery cover and
battery (Fig. 5)
WARNING
Make sure the battery cover is attached when operating
the tool.
Iron fi lings in the battery terminal area may result in
malfunction.
6. Remaining battery indicator (Fig. 6)
0000BookVB3616DA.indb160000BookVB3616DA.indb16 2023/02/1715:02:582023/02/1715:02:58
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki VB3616DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki VB3616DA in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info