816254
12
Zoom out
Zoom in
Previous page
1/192
Next page
12
English
If the BSL36B18 is installed in the power tool, the power
output will exceed 100 Wh and the unit will be classi ed
as Dangerous Goods for freight classi cation.
Wh
Power Output
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
There may be an occasional pause during USB
recharging.
When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1 – Fig. 35)
Reaction stopper A
Bending roller
Center plate
Center roller
Turn table
Cam cover
Guide
Lever
Inner cover
Warning label (Bending)
Warning label (Cutting)
Gear cover
Reaction stopper B
Cover
Grip rubber
Motor
Switch trigger
Handle
Switch lock
Battery
Battery cover
Setting dial
Alignment position
Name plate
Warning label (Battery cover)
Hexagonal bar wrench (For M5 hexagon socket bolt)
Switch panel
Manual mode switch
Mode indicator lamp
Cutter guard
Upper cutter
Lower cutter
Hexagon socket bolt
Rebar
Flat head screwdriver
Bending length
Stopper
Bolt
Nut
Hole to x unit
Work bench
Latch
Charge indicator lamp
Battery level indicator switch
Battery level indicator lamp
Rubber cover
USB port
USB cable
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
VB3616DA:
Cordless Portable Rebar Cutter/Bender
To reduce the risk of injury, user must read
instruction manual.
0000BookVB3616DA.indb120000BookVB3616DA.indb12 2023/02/1715:02:552023/02/1715:02:55
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki VB3616DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki VB3616DA in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info