816256
9
Zoom out
Zoom in
Previous page
1/168
Next page
9
English
5. Store set radio station
(1) Press the “SELECT” button.
(2) Press “>>” button to the point the “Store to Preset” and
con rm by pressing on the “SELECT” button.
(3) Select storage number with “<<” or “>>” buttons and
con rm by pressing on the “SELECT” button.
6. Listening to stored radio stations
(1) Press the “SELECT” button.
(2) Press “>>” button to the point the “Select Preset” and
con rm by pressing on the “SELECT” button.
(3) Select the desired stored radio station with “<<” or
“>>” buttons and con rm by pressing on the “SELECT”
button.
7. DAB/DAB+ (Digital Audio Broadcasting)
Station scan (starts automatically on initial commissioning):
(1) Press the “SELECT” button.
(2) Press “>>” button to select between the “Auto Scan”
and “Manual Tune”, and con rm by pressing on the
“SELECT” button. (Auto Scan should be preferred)
Set the desired station:
(1) After the “Auto Scan”, all the found stations are stored
automatically.
(2) Brows the received stations with “<<” or “>>” buttons.
Selection display settings:
(1) Press the “SELECT” button.
(2) Press “>>” button to the point the subitem the “RDS
Display” and con rm by pressing on the “SELECT”
button.
(3) Select desired menu with “<<” or “>>” buttons.
8. Bluetooth (depending on con guration)
(1) To change to BT (Bluetooth), press the “MODE” button
several times, until BT shows on the display.
(2) Activate Bluetooth on your smart phone (or another
mobile device such as a tablet).
(3) If your smart phone has detected the radio, it will be
shown with the device name “UR18DA”.
(4) On your smart phone establish the connection to the
device “UR18DA”.
The successful connection is shown on the display by
pressing the symbol.
(5) Start replay e.g. of a song on your smart phone.
9. Setting treble and bass
To change between treble and bass, press the “EQ”
button several times.
The active mode is shown on the display:
“TREBLE” and “BASS”.
The set value is shown in the display.
To change the setting, press the “–” button or the “+”
button.
10. Battery pack, displaying the battery pack charge
level
Over 75% The battery symbol on the display
shows the charge level of the battery
pack.
Recharge an empty battery pack in a
suitable HiKOKI charger.
50 to 75%
25 to 50%
Under 25%
MAINTENANCE AND INSPECTION
WARNING
When not in use or during inspection and maintenance,
be sure to remove the AC plug and rechargeable battery.
Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws be
loose, retighten them immediately. Failure to do so could
result in serious hazard.
Inspection of terminals (tool and
battery)
Check to make sure that swarf and dust have not
collected on the terminals.
On occasion check prior, during and after operation.
CAUTION
Remove any swarf or dust which may have collected on
the terminals.
Failure to do so may result in malfunction.
Cleaning on the outside
When the radio is stained, wipe with a soft dry cloth or a
cloth moistened with soapy water.
Do not use chloric solvents, gasoline or paint thinner, for
they melt plastics.
Storing the Radio
Do not store the radio in the following places.
Within reach of or easily accessible to children
In humid or dusty places
In high temperature such as inside a car or exposed
to direct sunlight
In extremely cold places or directly exposed to cold
draughts
Where the temperature changes drastically
Where it is exposed to smoke or steam such as near
a cooking appliance or humidi er
NOTE
Storing lithium-ion batteries.
Make sure the lithium-ion batteries have been fully
charged before storing them.
Prolonged storage (3 months or more) of batteries with
a low charge may result in performance deterioration,
signi cantly reducing battery usage time or rendering
the batteries incapable of holding a charge.
However, signi cantly reduced battery usage time may
be recovered by repeatedly charging and using the
batteries two to ve times.
If the battery usage time is extremely short despite
repeated charging and use, consider the batteries dead
and purchase new batteries.
SELECTING ACCESSORIES
The accessories of this machine are listed on page 160.
For details regarding each bit type, please contact the
HiKOKI Authorized Service Center.
Important notice on the batteries for the HiKOKI
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used with
batteries other than these designated by us, or when
the battery is disassembled and modi ed (such as
disassembly and replacement of cells or other internal
parts).
00BookUR18DAEU.indb900BookUR18DAEU.indb9 2022/12/1315:40:262022/12/1315:40:26
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki UR18DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki UR18DA in the language / languages: All languages as an attachment in your email.

The manual is 9.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info