742715
10
Zoom out
Zoom in
Previous page
1/172
Next page
10
English
2. Press the Select button and display “BUZZER ALM”.
BUZZER ALM
3. Press the Enter / Information button.
4. Press the Select button and display “ ”.
ON
5. Press the Enter / Information button.
6. Press the Select button and adjust “hour” digits.
12 : 00
7. Press the Enter / Information button.
8. Press the Select button and adjust “minute” digits.
12 : 30
9. Press the Enter / Information button.
10. Press the Select button to set up repeat.
Once ONCE
Daily DAILY
Weekdays only WEEKDAY
Saturday and Sunday only WEEKEND
DAILY
11. Press the Enter / Information button to complete setup.
will be displayed on the LCD.
To cancel the alarm setting, go to “BUZZER ALM” once
again and change the setting to “
”.
The alarm sound will automatically switch o after 10
minutes. The sound can also be switched o by pressing
any button.
NOTE
The volume of the buzzer alarm cannot be changed.
Setting the radio ON alarm timer
Using the radio ON alarm timer function, the radio can be
set up to switch ON at a speci c time to enjoy a station
broadcast.
1. Press the Menu button.
2. Press the Select button and display “RADIO ALM”.
RADIO ALM
3. Press the Enter / Information button.
4. Press the Select button and display “ ”.
ON
5. Press the Enter / Information button.
6. Press the Select button and adjust “hour” digits.
12 : 00
7. Press the Enter / Information button.
8. Press the Select button and adjust “minute” digits.
12 : 55
9. Press the Enter / Information button.
10. Press the Select button to set up repeat.
Once ONCE
Daily DAILY
Weekdays only WEEKDAY
Saturday and Sunday only WEEKEND
DAILY
11. Press the Enter / Information button.
12. Select radio bandwidth.
Press the Select button to display “AM” or “FM”.
FM
13. Press the Enter / Information button.
14. Press the Select button to display a preset station.
P2 FM 79.5 MHz
To select a station by broadcast frequency, use the
Search button.
FM 80.0 MHz
15. Press the Enter / Information button to complete setup.
will be displayed on the LCD.
To cancel the radio alarm setting, go to “RADIO ALM”
once again and change the setting to “
”.
NOTE
The radio’s volume will be at the level when the radio
was last switched OFF.
RECHARGING YOUR SMARTPHONE
Devices such as a smartphone and mobile phone can be
recharged by connecting the device to this radio.
The recharge function is only available for the “
” or
mode. (Recharging cannot be done in “
mode.)
NOTE
When recharging in “
mode, set the volume output
at 20 or less.
The radio is designed to deactivate USB output and
disable the recharging of smartphones and mobile
phones when the volume is at 21 or more.
(For
mode, USB recharging will continue even if
the volume output is 21 or more.)
On rare occasions, sound output may be interrupted or
power could shutdown during USB recharging.
If either should occur, lower the volume level or stop
recharging with the USB.
The radio is designed to deactivate USB output and
disable the recharging of smartphones and mobile
phones when the power level of the battery is low.
Should the aforementioned occur, recharge the battery
or replace with a fully charged battery.
0000Book_UR18DSAL.indb 100000Book_UR18DSAL.indb 10 2020/09/04 17:49:062020/09/04 17:49:06
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki UR 18DSAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki UR 18DSAL in the language / languages: All languages as an attachment in your email.

The manual is 143,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info