816270
6
Zoom out
Zoom in
Previous page
1/128
Next page
6
English
*1 When in Wide mode and set to High
*2 Existing batteries (BSL3660/3620/3626, etc.) cannot be
used with this tool.
*3 According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
CHARGING
Before using the tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See Table 1)
Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery. Table 1
Indications of the pilot lamp (RED)
Before
charging
Lights on for
0.5 seconds and o
for 0.5 seconds
(Blinks)
Plugged into power
source
While
charging
Lights continuously
(Lights)
Charging
complete
Lights on for
0.5 seconds and o
for 0.5 seconds
(Blinks)
Overheat
standby
Lights on for
1 second and o for
0.5 seconds
(Blinks)
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)
Charging
impossible
Lights on for
0.1 seconds and o
for 0.1 seconds
(Flickers)
Malfunction in
the battery or the
charger
Regarding the temperatures and charging time of the
battery.
The temperatures and charging time will become as
shown in Table 2.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
UB18DH : Cordless Spotlight
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Direct current
Do not stare at operating lamp.
V volts
0,2m Keep the light and the object being illuminated
at least 0.2 m apart.
W watts
ta ambient temperature
Class III tool
APPLICATIONS
Illumination of work site
SPECIFICATIONS
Model UB18DH
Voltage 18 V
Brightness 1050 lm*1
LED (white) 10 W
Operating
time
(Using full
charged
battery)
High 3.0 Ah: Approximatery 4.5 hours
5.0 Ah: Approximatery 8 hours
8.0 Ah: Approximatery 12.5 hours
Medium 3.0 Ah: Approximatery 7 hours
5.0 Ah: Approximatery 12 hours
8.0 Ah: Approximatery 19 hours
Low 3.0 Ah: Approximatery 14.5 hours
5.0 Ah: Approximatery 24 hours
8.0 Ah: Approximatery 38.5 hours
Strobe 3.0 Ah: Approximatery 9.5 hours
5.0 Ah: Approximatery 15.5 hours
8.0 Ah: Approximatery 25 hours
Battery available for
this tool*2Li-ion battery Multi volt type,
BSL18 Series
Weight*31.1 kg (BSL1830C)
1.7 kg (BSL36B18)
00BookUB18DH.indb600BookUB18DH.indb6 2023/02/068:36:202023/02/068:36:20
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki UB18DH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki UB18DH in the language / languages: All languages as an attachment in your email.

The manual is 4.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info