816295
7
Zoom out
Zoom in
Previous page
1/188
Next page
7
English
- Use of devices, such as: routers, planers, small
grinding devices, etc.
When using a fleece filter bag (5) the filter cleaning
is non-functional.
Switch off the device, remove the mains plug and
open the snap locks (8). Remove the upper part (7)
of the device from the container (9).
Turn the red rotary switch (on
the inside of the suction
opening) until the stop: the text
"CLOSE" shows upwards to
the marking .
Hold the fleece filter bag (5) on the flange and, with
its opening, guide it first over the latch at the bottom
part of the suction opening, then fit up to the stop on
the suction opening. Replace the upper part of the
device on the container, close the snap locks.
8.2 Inserting a PE Disposal Bag (sold sepa-
rately)
We recommend the use of PE-disposal bags for:
- Applications, where larger amounts of dust are
created (e.g. removal of plaster surfaces, spot-
grinding and grinding of screeds, etc.).
- Use of devices, such as e.g.: renovation milling
devices, renovation grinders, drywall grinders,
wall grinders etc.
When using a PE disposal bag, the filter cleaning
must be switched on (function AR / IR) for
corresponding materials (see recommendation).
Switch off the device, remove the mains plug and
open the snap locks (8). Remove the upper part (7)
of the device from the container (9).
Turn the red rotary switch (on
the inside o the suction
opening) to the stop: the text
"OPEN" shows upwards to the
marking .
Hold the PE disposal bag on the flange and, with its
opening, guide it first over the latch at the bottom
part of the suction opening, then fit up to the stop on
the suction opening.
Spread out the PE disposal bag evenly across the
container floor. Arrange the edges of the PE
disposal bag around the container rim so that the
bag is firmly clamped on all sides by the upper part
(7), once replaced.
9.1 Switching On/Off, Automatic, ACP
Select the required operating mode using the
switch (2):
Position "0":
Dust extractor is switched off
Position "I":
Dust extractor is switched on
ACP* is switched off
Position "IR":
Dust extractor is switched on
ACP* is switched on
Position "AR":
Automatic On/Off switch: The dust
extractor is switched on or off by means
of a power tool connected to the plug
socket (4). (Note: The dust extractor continues to
run for approx. 10 seconds after the power tool is
switched off. This is to ensure that dust does not
remain in the hose.)
ACP* is switched on
* ACP (Automatic Vibrate Function): automatic filter
cleaning when you switch on the device and
when a specific negative pressure value is
reached. For filters that remain clear, with no
need to interrupt work.
9.2 Plug socket (4)
The plug socket (4) is designed for connection
to a power tool only.
The total maximum permissible current
consumption (of dust extractor and connected
unit) must not exceed 16 A.
CAUTION! Ensure that the power tool is
switched off when plugging it in. Regardless of
the switch position, the plug socket is always live
when the mains plug is plugged in.
If the switch (2) is in the "0" position, you can use the
plug socket as an extension lead (e.g. for a light
fitting).
If the switch (2) is in the "AR" position, the dust
extractor is switched on or off by means of a power
tool connected to the plug socket (4).
9.3 Suction power regulator
Using the suction power regulator (1), you can
adjust the motor speed and thus the suction power
continuously to the working conditions.
9.4 Volume flow control display
The volume flow control display (3) flashes when
the container is full and/or if the suction hose is
blocked.
9. The device
FFO
0
NO
A
I
NO
RI
R
I
RA
RP350YBL_C99749971_305.book 7 ページ 2023年4月6日 木曜日 午後1時6分
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki RP350YBL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki RP350YBL in the language / languages: All languages as an attachment in your email.

The manual is 22.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info