816294
6
Zoom out
Zoom in
Previous page
1/164
Next page
6
English
WARNING
The following show symbols used for the
device. Be sure that you understand their
meaning before use.
.
.
*1 at the hose, *2 at the fan
*3 Weight: According to EPTA-Procedure 01/2014
Connection line on dust extractors with plug socket:
H05RR-F 3X 1.5
Note: Due to HiKOKI’s continuing program of
research and development, the specifications
herein are subject to change without prior notice.
Before plugging in the device, check that
the rated mains voltage and mains
frequency, as specified on the rating label,
match your power supply.
8.1 Fitting wheels (if necessary)
Insert the axles of the guide rollers in the holes
in the container until they engage.
Fit the large wheels as shown:
8.2 Inserting a Fleece Filter Bag
We recommend using paper and fleece filter bags
for:
- Applications, where small amounts of fine dust are
created (e.g. spot-grinding and grinding of paint
and lacquer coatings, extraction of drilling
applications with small diameters < 10 mm of
short duration, etc.).
- Use of devices, such as: routers, planers, small
grinding devices, etc.
Switch off the device, remove the mains plug and
open the snap locks (7). Remove the upper part (6)
from the container (8).
5. Symbols
RP250YBL: Dust extractor
To reduce the risk of injury, user must
read instruction manual.
WARNING
WARNING! The dust extractor may
contain hazardous dust.
Dust class L (light). The dust extractors
are capable of picking up dust class L.
Follow your country's regulations relating
to dusts and to occupational health and
safety.
6. Standard Accessories
Suction hose (φ35 mm / 3.2 m) 1
Polyester filter cassettes (M class):
Attached to device 2
Fleece filter bag 1
Crevice nozzle 1
Universal nozzle 1
Handle adapter 1
Plastic suction tubes 2
Tube support 1
7. Specifications
RP250YBL
Voltage V ~ 220–240
Frequency Hz 50/60
Rated power W 1400
Air flow*
1
m³/h 151
Air flow*
2
m³/h 263
Negative pressure*
1
hPa 235
Negative pressure*
2
hPa 270
L W H mm 457 400 535
Weight without mains
cable*
3
kg 12.4
Filter surface cm
2
8400
8. Initial Operation
RP250YBL_C99749871_305.book 6 ページ 2023年4月6日 木曜日 午後12時6分
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki RP250YBL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki RP250YBL in the language / languages: All languages as an attachment in your email.

The manual is 15.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info