816272
13
Zoom out
Zoom in
Previous page
1/228
Next page
13
English
Important notice on the batteries for the HiKOKI
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used
with batteries other than these designated by us, or
when the battery is disassembled and modi ed (such
as disassembly and replacement of cells or other
internal parts).
GUARANTEE
We guarantee HiKOKI Power Tools in accordance with
statutory/country speci c regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling instruction,
to a HiKOKI Authorized Service Center.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60335-2-69 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 84 dB (A)
Measured A-weighted sound pressure level: 73 dB (A)
Uncertainty K: 2 dB (A).
Wear hearing protection.
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
TROUBLESHOOTING
Reduction in suction power:
See the instructions in CLEANING.
• Is the lter dirty? - clean.
Dust bag full? - replace.
Tank full? - empty.
Nozzle, tubes or hose blocked?- clean.
Is the battery weak? - Charge/replace battery.
Device will not start:
Is the battery empty? - Charge/replace battery.
Water level detection active - empty tank, set switch to
“0” and restart the vacuum at level “I” or “II”.
Particles are discharged at the outlet:
• Is the lter defective? - Check the lter and replace if
required (“2. Replacing the lter” of “MAINTENANCE
AND INSPECTION”).
The device has shut down by itself:
Causes and remedies:
• Battery almost at: (the electronics prevent the battery
form discharging totally and avoid damage). If the
capacity indicator ashes after pressing the battery
button to display the battery capacity, then the battery
is almost empty and must be recharged.
Battery is not inserted properly: Check and correct.
Long continuous overloading of the device will activate
the temperature cut-out.
Leave the device or battery to cool.
Water level detection active - empty tank, set switch to
“0” and restart the vacuum at level “I” or “II”.
000BookRP18DAEU.indb13000BookRP18DAEU.indb13 2023/07/1917:13:112023/07/1917:13:11
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki RP18DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki RP18DA in the language / languages: All languages as an attachment in your email.

The manual is 12.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info