816296
6
Zoom out
Zoom in
Previous page
1/48
Next page
6
English
PRECAUTION
Keep children and in rm persons away.
When not in use, tools should be stored out of reach
of children and in rm persons.
HEAT GUN SAFETY WARNINGS
WARNING
1. This tool is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the tool by a person responsible
for their safety.
2. Children should be supervised to ensure
that they do not play with the tool.
3. A re may arise if the tool is not used
with care, therefore:
Be careful when using the tool in places
where there are combustible materials.
Do not apply to the same place for a long
time.
Do not use in presence of an explosive
atmosphere.
Be aware that heat may be conducted to
combustible materials which are out of
sight.
Place on its stand after use and follow to
cool before storage.
Do not leave the tool unattended when
in use.
4. Do not use the tool or touch the power
plug with wet hands.
Failure to observe this may result in
electric shocks.
5. Always check the work area prior to use,
and do not use the tool if safety cannot
be guaranteed.
Failure to observe this may result in
in ammable articles concealed in or
behind invisible areas (cases, ceilings,
oors, hollow areas) being ignited.
6. Do not stand underneath when using the
tool in elevated locations.
Also, do not catch the power cord on
anything, or allow it to be pulled.
Failure to observe this may result in
accidents.
7. Do not point the hot wind directly at
people or animals.Do not look into the
nozzle. Do not use it as a hair dryer
under any circumstances.
Failure to observe this may result in
accidents or injury.
8. There are cases in which highly toxic
gas will be emitted if used on plastic,
lacquer or similar materials.
Always ensure that the work area is fully
ventilated, and wear a dust-protection
mask.
9. Apply heat gently while moving the Heat
Gun up, down, left and right.
Aiming it constantly at a single location
may result in the outbreak of smoke or
re.
10. Check the tool for damage, cracks or
malformation in the event of it being
accidently dropped or subject to impact.
Damage, cracks and malformation may
result in injury.
11. Cease operations immediately in the
event of the tool not operating properly
or if abnormal noises or vibrations
are noticed, and contact a HiKOKI
Authorized Service Center to request
inspections and repairs.
Continued use may result in injury.
12. Do not get away from the unit while it is
switched on. Failure to observe this may
result in accidents.
13. If during use, electricity is interrupted,
(e.g. the power plug came out, the
breaker fell, a blackout occurred) and
the heat gun fan has stopped, please put
00BookRH600TWE.indb600BookRH600TWE.indb6 2019/07/1210:33:352019/07/1210:33:35
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki RH600T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki RH600T in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info