816236
6
Zoom out
Zoom in
Previous page
1/240
Next page
6
English
7. When working in elevated locations,
make sure there are no people or
ammable materials underneath.
Failure to observe this may result in
accidents.
8. Do not point the hot air directly at people
or animals. Do not look into the nozzle.
Do not use it as a hair dryer under any
circumstances.
Failure to observe this may result in
accidents or injury.
9. There are cases in which highly toxic
gas will be emitted if used on plastic,
lacquer or similar materials.
Always ensure that the work area is fully
ventilated, and wear a dust-protection
mask.
10. Apply heat gently while moving the Heat
Gun up, down, left and right.
Aiming it constantly at a single location
may result in the outbreak of smoke or
re.
11. Check the tool for damage, cracks or
malformation in the event of it being
accidently dropped or subject to impact.
Damage, cracks and malformation may
result in injury.
12. Cease operations immediately in the
event of the tool not operating properly
or if abnormal noises or vibrations
are noticed, and contact a HiKOKI
Authorized Service Center to request
inspections and repairs.
Continued use may result in injury.
13. Do not get away from the unit while it is
switched on. Always return the switch
to the OFF (
) position when you are
nished working. Failure to observe this
may result in accidents.
14. When removing the battery, please put
the switch in OFF (
) position.
CAUTION
1. Parts of the nozzle supplied are sharp,
so use gloves when removing them
from the case and when attaching or
detaching them.
2. The nozzle, the tip of the nozzle and the
material that was heated are extremely
hot during and immediately after using
the tool, so use gloves and avoid
touching them directly.
3. Do not use inside boxes, drawers or
other enclosed spaces.
Aiming it constantly at a single location
may result in the outbreak of smoke or
re.
4. Make sure the nozzle is at least 5 cm
away from the item being heated when
using the tool. Also, do not cover or
otherwise block the nozzle.
Failure to observe this may result in
the Heat Gun overheating, leading to
malfunctions.
5. Do not switch the tool on and o
repeatedly.
Failure to observe this may result in
malfunctions.
6. Do not point the nozzle downwards
immediately after use.
Failure to observe this may result
in the tool overheating, leading to
malfunctions.
7. Do not give a strong shock to the panel
or break it. It may lead to a trouble.
8. When storing, make sure the tool is
completely cooled. Failure to observe
this may cause burns or storage case
deformation.
00BookRH18DAEU.indb600BookRH18DAEU.indb6 2022/12/2010:06:502022/12/2010:06:50
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki RH18DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki RH18DA in the language / languages: All languages as an attachment in your email.

The manual is 8.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info