816325
8
Zoom out
Zoom in
Previous page
1/228
Next page
8
English
Disconnect the battery
Switching ON
Switching OFF
Lock
Switch locks to the “ON” position
Warning
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 218.
Standard accessories are subject to change without notice.
APPLICATIONS
Cleaning facilities and equipment in lumbermills,
cigarette-making plants, spinning mills, etc.
Cleaning devices and equipment in repair shops.
Blowing operation.
SPECIFICATIONS
1. Power tool
Model RB18DC
Voltage 18 V
No-Load Speed*10–20000 min–1
Air velocity
Maximum*2
0–95 m/s
Average*2
0–78 m/s
Air volume*30–3.5 m3/min
Continuous operating
time*4
3: Approximately 20 minutes
2: Approximately 55 minutes
1: Approximately 130 minutes
Battery available for
this tool*5Multi volt battery, BSL18 Series
Weight*61.8 kg (BSL36A18)
2.1 kg (BSL36B18)
*1 BSL36A18, when fully charged
*2 With nozzle
*3 Without nozzle
*4 For guidance purposes only. Results will di er according
to situations such as operating environment and battery
condition.
*5 Existing batteries (BSL3660/3620/3626, etc.) cannot be
used with this tool.
*6 According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
2. Battery (sold separately)
Model BSL36A18 BSL36B18
Voltage 36 V / 18 V (Automatic Switching*)
Battery capacity 2.5 Ah / 5.0 Ah 4.0 Ah / 8.0 Ah
(Automatic Switching*)
Available cordless
products** Multi volt series, 18 V product
Available charger Sliding charger for lithium ion
batteries
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
3. Charger (sold separately)
Model UC18YSL3
Charging voltage 14.4 V–18 V
Weight 0.6 kg
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the housing tightly and push the battery latches to
remove the battery (see Fig. 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
00BookRB18DCEU.indb800BookRB18DCEU.indb8 2022/06/1510:54:502022/06/1510:54:50
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki RB18DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki RB18DC in the language / languages: All languages as an attachment in your email.

The manual is 10.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info