816426
12
Zoom out
Zoom in
Previous page
1/292
Next page
12
English
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION
When transporting a lithium-ion battery, please observe the
following precautions.
WARNING
Notify the transporting company that a package contains a
lithium-ion battery, inform the company of its power output
and follow the instructions of the transportation company
when arranging transport.
Lithium-ion batteries that exceed a power output of
100 Wh are considered to be in the freight classi cation
of Dangerous Goods and will require special application
procedures.
For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
If the BSL36B18 is installed in the power tool, the power
output will exceed 100 Wh and the unit will be classi ed
as Dangerous Goods for freight classi cation.
Wh
Power Output
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
There may be an occasional pause during USB
recharging.
When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
It may not be possible to charge some USB devices,
depending on the type of device.
<USB charging>
Charging a USB device from an electrical outlet
(Fig. 27-a)
Charging a USB device and battery from an electrical
outlet (Fig. 27-b)
How to recharge USB device (Fig. 28)
When charging of USB device is completed (Fig. 29)
NAMES OF PARTS (Fig. 1–Fig. 29)
Battery Template guide
Head cover Screw
Name plate Template
Dial Trimmer guide
Motor Guide pin
Rack portion Stop screw
Lock lever Knob bolt (C)
Pinion Washer (A)
Collet nut Body feed direction
Collet cone Straight guide
Base ass’y Guide holder
Shaft Wing nut
Switch button Bolt
Knob bolt (A) Wave washer
Fixing nut Washer
Lock pin Center hole
Knob bolt (B) Nail (rotation axis)
LED light Dust collector
Switch Panel Positioning hole
Power button Protrusion
Remaining battery
indicator lamp Screw hole
Latch Knob bolt (D)
Charge indicator lamp Joint (C)
Removing Hose (id 32 mm,
35 mm, 38 mm)
Fixing Hose (id 28 mm)
Socket wrench (8 mm) Work piece
Loosen Rotation of bit
Tighten Trimmer feed
23 mm Wrench Inner peripheral cutting
(Clockwise)
Bit Outer peripheral
cutting
(Counterclockwise)
Collet cone hole Air gun
13 mm Wrench Battery sliding grooves
Upper end of base
ass’y Ventilation holes
Scale
00BookM1808DA.indb1200BookM1808DA.indb12 2021/09/3010:32:372021/09/3010:32:37
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki M1808DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki M1808DA in the language / languages: All languages as an attachment in your email.

The manual is 18.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info