816386
9
Zoom out
Zoom in
Previous page
1/156
Next page
9
English
7.
The wheel continues to rotate after the tool is switched o .
After switching o the machine, do not put it down until the
depressed center wheel has come to a complete stop. Apart
from avoiding serious accidents, this precaution will reduce
the amount of dust and swarf sucked into the machine.
8. When the machine is not use, the power source should
be disconnected.
9.
Be sure to switch OFF and disconnect the attachment plug
from the receptacle to avoid a serious accident before the
depressed center wheel is assembling and disassembling.
10. RCD
The use of a residual current device with a rated residual
current of 30 mA or less at all times is recommended.
NAMES OF PARTS (Fig. 1 – Fig. 8)
Wheel guard Wheel nut
Toolless wheel guard "Quick" clamping nut
Hex. bar wrench Wrench
M5 hex. socket bolt Wheel guard with side
guard
(sold separately)
Lever Abrasive cutting wheel
(sold separately)
Push button Lock lever
Spindle Trigger switch
Wheel washer Diamond wheel
(sold separately)
Depressed center
wheel
(sold separately)
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
G23STA / G23SWA / G23SWUA / G23SCA :
Disc Grinder
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
V Rated voltage
Alternating current
PPower input
nRated speed
min-1 Revolution or reciprocations per minute
D Wheel outer diameter
d Wheel hole diameter
t Wheel thickness
Peripheral speed
kg Weight (Only main body)
Switching ON
Switching OFF
Lock
Switch locks to the “ON” position.
Soft-start (For G23SWUA / G23SCA only)
UUsual carbon brush
AAuto-stop carbon brush
Disconnect mains plug from electrical outlet
Warning
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains
the accessories listed in the below.
(1) Wrench .........................................................................1
(2) Side handle ...................................................................1
(3) Hexagonal bar wrench ..................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
Removal of casting n and nishing of various types of
steel, bronze and aluminum materials and castings.
Grinding of welded sections or sections cut by means of
a cutting torch.
Grinding of synthetic resins, slate, brick, marble, etc.
Cutting of synthetic concrete, stone, brick, marble, and
similar materials.
SPECIFICATIONS
The speci cations of this machine are listed in the Table on
page 145.
(For G23SWUA / G23SCA only)
Soft-start
0 Voltage Re-start Protection
The 0 voltage restart protection feature prevents the
power tool from restarting after the power has been
temporarily cut o during operation.
* Be sure to check the nameplate on product as it is subject
to change by areas.
0000BookG23STA.indb90000BookG23STA.indb9 2022/06/1511:56:102022/06/1511:56:10
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki G23SWA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki G23SWA in the language / languages: All languages as an attachment in your email.

The manual is 16.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info