816226
12
Zoom out
Zoom in
Previous page
1/284
Next page
12
English
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION
When transporting a lithium-ion battery, please observe the
following precautions.
WARNING
Notify the transporting company that a package contains a
lithium-ion battery, inform the company of its power output
and follow the instructions of the transportation company
when arranging transport.
Lithium-ion batteries that exceed a power output of
100 Wh are considered to be in the freight classi cation
of Dangerous Goods and will require special application
procedures.
For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
Power Output
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
There may be an occasional pause during USB
recharging.
When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1–Fig. 2
0
)
Motor Gear cover
Nameplate Depressed center
wheel (sold separately)
Push button Toolless wheel guard
Side handle Switch
Housing Hole of wheel guard
Switch panel Bump of lever
Filter Wheel washer (C)
Battery Wheel nut
Auto mode switch Wrench
Remaining battery
indicator switch
(Product)
Abrasive cutting
wheel
(sold separately)
Remaining battery
indicator lamp
(Product)
Diamond wheel
(sold separately)
Switch lever O -lock lever
Dial Remaining battery
indicator switch
(Battery)
Guard clip (mounted
on wheel guard when
packaged)
Remaining battery
indicator lamp
(Battery)
Latch Mesh
Charge indicator lamp Soft brush
Tabs of guard clip
(2 locations) Diamond cup wheel
(sold separately)
Lever
Dust collection adapter
(For diamond cup
wheel)
(sold separately)
Bump of wheel guard Dust collection adapter
(For diamond wheel)
(sold separately)
Notch of body
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
G1812DE / G1813DE / G1813DF / G1813DVE /
G1813DVF:
Cordless Disc Grinder
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always operate the power tool with two hands
Not for cut-o operations
When using a cutting-o wheel, be sure to
attach the type A wheel guard.
when using a type B wheel guard for cutting-o
operations with bonded cut-o wheels, there is
an increased risk of exposure to emitted sparks
and particles, as well as exposure to wheel
fragments in the event of a wheel burst.
00BookG1812DEEU.indb1200BookG1812DEEU.indb12 2022/11/2814:50:462022/11/2814:50:46
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki G1813DVF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki G1813DVF in the language / languages: All languages as an attachment in your email.

The manual is 12.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info