742697
11
Zoom out
Zoom in
Previous page
1/280
Next page
11
English
NAMES OF PARTS (Fig. 1 – Fig. 15)
Motor Charge indicator lamp
Nameplate
Battery level indicator
switch
Lock pin
Battery level indicator
lamp
Side handle Lever
Gear cover Hex. bar wrench
Depressed center
wheel
Wheel washer (C)
M5 hex. socket bolt Wheel nut
Wheel guard Wrench
Switch knob With side guard
Dial
Abrasive cutting
wheel
Filter O -lock lever
Battery Rubber cover
Switch lever USB port
Latch USB cable
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
G3613DA / G3613DB: Cordless Disc Grinder
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC
on waste electrical and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
V Rated voltage
n
Rated speed
n
0
No-load rotation speed
min
-1
Revolution or reciprocations per minute
Switching ON
Switching OFF
Disconnect the battery
Warning
Remaining battery indicator switch
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 273.
Standard accessories are subject to change without notice.
APPLICATIONS
Removal of casting n and nishing of various types of
steel, bronze and aluminum materials and castings.
Grinding of welded sections or sections cut by means of
a cutting torch.
Grinding of synthetic resins, slate, brick, marble, etc.
SPECIFICATIONS
1. Power tool
Model
G3613DA G3613DB
Voltage 36 V
Rated speed
Transmission mode:
3000 – 9500 min
-1
Auto mode:5500 min
-1
Wheel
Outer dia. 125 mm
Hole dia. 22.23 mm
Thickness 6 mm
Peripheral speed 80 m/s
Battery available
for this tool*
BSL36A18
Weight** 2.8 kg
* Existing batteries (BSL3660/3620/3626, BSL18xx
series, etc.) cannot be used with this tool.
** Weight: According to EPTA-Procedure 01/2003
000Book_G3613DA_DB_EU.indb 11000Book_G3613DA_DB_EU.indb 11 2019/12/26 11:53:532019/12/26 11:53:53
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki G 3613DB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki G 3613DB in the language / languages: All languages as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info