742234
6
Zoom out
Zoom in
Previous page
1/100
Next page
6
English
TROUBLESHOOTING GUIDE
WARNING
To avoid injury from an accidental start, turn the switch OFF and remove the plug from the power source
and remove the AC/DC adapter from the tool before making any adjustments.
All electrical or mechanical repairs should be done only by quali ed service technicians. Contact HiKOKI
Authorized Service Center.
Symptom Possible cause Remedy
Cannot be attached to the
main unit
Does not operate
Used with a 14.4 V/18 V product
Used with a 36 V product that is
incompatible with a multi volt battery.
Use with a 36 V product that is compatible
with multi volt battery.
Suddenly stops
The tool or the AC/DC adapter became
overheated
Allow the tool and the AC/DC adapter to
fully cool.
The tool was overloaded Remove the cause of the overload.
Frequently stops
Protection function activated due to
consecutive use with high workloads.
Not a problem. Avoid high workloads when
operating unit.
Overheating caused by the box or
adapter’s ventilation hole being blocked by
obstructions such as cloth or wood scraps
Remove any obstructions blocking the
ventilation hole to allow air to reach the
box and adapter.
The box’s error lamp blinks
and comes to a halt
Box at high temperature
Disconnect the box’s power plug and allow
the box to fully cool.
Problem with power source
Use of multi-outlet or single outlet
extension cords may cause insu cient
voltage. Use a power source capable of
providing a voltage of 100 V.
When the power source is disconnected,
allow over 30 seconds to pass before
reconnecting.
The adapter is hot Heats up with continuous use
Continue with electric conduction and
allow the unit to fully cool by fan or in a
shaded area with good air circulation.
Something is wrong
with the operation of
the overload protection
function
Overload protection function’s activation
conditions vary when using a battery as
opposed to using an AC/DC adapter
Not a problem. To protect the unit, avoid
overload during operation.
000Book_ET36A_EU.indb 6000Book_ET36A_EU.indb 6 2019/04/26 10:13:112019/04/26 10:13:11
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki ET 36A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki ET 36A in the language / languages: All languages as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info