816298
4
Zoom out
Zoom in
Previous page
1/112
Next page
4
English
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
VRated voltage
PPower Input
n0No-load speed
Rotation only function
Rotation and impact function
Concrete
Switching ON
Switching OFF
On / O switch lock-on
Change rotation speed - High speed
Change rotation speed - Low speed
Clockwise rotation
Counterclockwise rotation
Disconnect mains plug from electrical outlet
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
(1) Chuck wrench (Spec. only for keyed chuck) ................1
(2) Side handle ..................................................................1
(3) Depth gauge ................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
By combined actions of ROTATION and IMPACT:
Boring holes in hard materials (concrete, marble, granite,
tiles, etc.)
By ROTATIONAL action:
Boring holes in metal, wood and plastic.
SPECIFICATIONS
Voltage*1(110 V, 220 V, 230 V, 240 V)
Power input 790 W*1
Speed range 1 2
No load
speed
Forward
rotation 0 – 1000 min-1 0 – 3000 min-1
Reverse
rotation 0 – 600 min-1 0 – 1800 min-1
Capacity
Steel 13 mm 8 mm
Concrete 20 mm 13 mm
Wood 40 mm 25 mm
Full-load impact rate 8000 min-1 26000 min-1
Weight*22.5 kg
*1 Be sure to check the nameplate on product as it is
subject to change by areas.
*2 Weight: According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
Action Figure Page
Fixing and removing side handle 1 100
Using depth stopper 2 100
Mounting and dismounting of the
bit (For keyed chuck) 3 100
Mounting and dismounting of the
bit (For keyless chuck Type A)*14 100
Mounting and dismounting of the
bit (For keyless chuck Type B)*25 100
Selecting rotation direction 6 101
Selecting the operating mode 7 101
Switch operation*38 101
Locking-on the switch 9 101
Releasing the switch 10 101
Change rotation speed 11 102
Selecting accessories 103
Selecting the appropriate drill bit
When boring concrete or stone
Use the drill bits speci ed in the Optional Accessories.
When boring metal or plastic
Use an ordinary metalworking drill bit.
When boring wood
Use ordinary woodworking drill bit.
However, when drilling 6.5 mm or smaller holes, use a
metalworking drill bit.
*1 Type A (Fig. 4)
(1) Mounting the bit
Turn the lock collar in the direction “AUF” and open the
chuck. After inserting the drill bit into the chuck as far it
will go, turn the lock collar in the “ZU” direction. Grip the
ring and close the chuck by turning the sleeve clockwise
as viewed from the front.
00BookDV20VB2.indb400BookDV20VB2.indb4 2022/12/2810:29:152022/12/2810:29:15
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki DV20VB2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki DV20VB2 in the language / languages: All languages as an attachment in your email.

The manual is 11.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info