816392
4
Zoom out
Zoom in
Previous page
1/104
Next page
4
English
Rotation only function
Rotation and impact function
Switching ON
Switching OFF
On / O switch lock-on
Disconnect mains plug from electrical outlet
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
(1) Chuck wrench (Spec. only for chuck tted with chuck
wrench) ........................................................................ 1
(2) Side handle ..................................................................1
(3) Depth stopper ..............................................................1
(4) Plastic case ..................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
By combined actions of ROTATION and IMPACT:
Boring holes in hard materials (concrete, marble, granite,
tiles, etc.)
By ROTATIONAL action:
Boring holes in metal, wood and plastic.
SPECIFICATIONS
Voltage (by areas)*1(110 V, 220 V, 230 V, 240 V)
Power input 590 W*1
No load speed 0 – 2900 min-1
Drill chuck capacity 13 mm
Capacity
Steel 13 mm
Concrete 16 mm
Wood 25 mm
Full-load impact rate 34500 min-1
Weight (without cord)*21.9 kg
*1 Be sure to check the nameplate on product as it is
subject to change by areas.
*2 According to EPTA-Procedure 01/2014.
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
Action Figure Page
Fixing and removing side handle
195
Using depth stopper 2 95
Mounting and dismounting of
the bit 395
Dismounting the bit of keyless
chuck (When the keyless chuck
cannot be loosened) 495
Selecting rotation direction 5 96
Selecting the operating mode 6 96
Switch operation 7 96
Locking-on the switch 8 96
Releasing the switch 9 96
Mounting position of hook (A)*
(Optional accessory) 10 96
Selecting accessories 98
* Attaching the hook. (Optional accessory) (Fig. 10)
(1) To attach the hook, it is necessary to disassemble
the handle portion which covered the tool’s electrical
system. For your continued safety and electrical
shock protection, installing the hook on this impact
drill should ONLY be performed by a HiKOKI
AUTHORIZED SERVICE CENTER.
(2) When the power tool is used with a hook fixed to it,
pay attention to the following points:
Before hanging the main unit from the waist belt, make
sure that the impact drill has come to a complete stop.
While it is suspended from the waist belt, the power
plug must be disconnected from the power source.
Do not walk about with the power tool hanging from
the waist belt.
In the case of operation in a high place, it is dangerous
to drop the tool accidentally. If the hook is deformed or
hung from the wrong position, there is danger that the
hook will slip o and the tool will fall.
Be careful to avoid danger.
In making a through hole, the power tool sometimes
shakes violently when the workpiece is pierced, from
example. Be careful you are not hurt by the hook even
if such situation happens.
Selecting the appropriate drill bit
When boring concrete or stone
Use the drill bits speci ed in the Optional Accessories.
When boring metal or plastic
Use an ordinary metalworking drill bit.
When boring wood
Use ordinary woodworking drill bit.
However, when drilling 6.5 mm or smaller holes, use a
metalworking drill bit.
0000BookDV16V.indb40000BookDV16V.indb4 2022/10/1823:44:262022/10/1823:44:26
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki DV16V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki DV16V in the language / languages: All languages as an attachment in your email.

The manual is 12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info