816348
5
Zoom out
Zoom in
Previous page
1/156
Next page
5
English
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
DS10DAL: Cordless Driver Drill
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
kg Weight*
(According to EPTA-Procedure 01/2014)
Drill mark
Switching ON
Switching OFF
Change rotation speed - High speed
Change rotation speed - Low speed
Clockwise rotation
Counterclockwise rotation
* Depending on attached battery. The heaviest weight is
measured with BCL1030 (sold separately).
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed on page 144.
Standard accessories are subject to change without notice.
APPLICATIONS
Driving and removing of machine screws, wood screws,
tapping screws, etc.
Drilling of various metals
Drilling of various woods
SPECIFICATIONS
Model DS10DAL
No-load speed (Low / High) 0 – 350 / 0 – 1300 min-1
Capacity
Drilling
Wood (Thickness 18 mm) 29 mm
Metal (Thickness 1.6 mm) Steel: 10 mm
Aluminum: 12 mm
Driving
Machine screw 6 mm
Wood screw 5.8 mm (diameter) × 45 mm (length)
(Requires a pilot hole)
Rechargeable battery
BCL1015S: Li-ion 10.8 V (1.3 Ah 3 cells)
BCL1015: Li-ion 10.8 V (1.5 Ah 3 cells)
BCL1030: Li-ion 10.8 V (3.0 Ah 6 cells)
Weight
1.0 – 1.2 kg
Model UC10SL2
Charging voltage 10.8 V
Weight 0.35 kg
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts the
bottom of the charger as shown in Fig. 2.
3. Charging
When inserting a battery in the charger, the pilot lamp
will light up continuously in red.
When the battery becomes fully recharged, the
pilot lamp will blink in red (At 1-second intervals).
(See Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
0000BookDS10DAL.indb50000BookDS10DAL.indb5 2022/10/1823:15:452022/10/1823:15:45
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki DS10DAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki DS10DAL in the language / languages: All languages as an attachment in your email.

The manual is 4.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info