816313
8
Zoom out
Zoom in
Previous page
1/136
Next page
8
English
PPower Input
n0No-load speed
Bpm Full-load impact rate
φ
max Drilling diameter, max.
kg
Weight
(According to EPTA-Procedure 01/2014)
Drill bit
Core bit
Adjustment of the tool position function
Hammering only function
Rotation and hammering function
Switching ON
Switching OFF
Rotation speed selector switch
Display lamp
Ls Low speed / impact rate
Hs High speed / impact rate
Disconnect mains plug from electrical outlet
Class II tool
SDS max shank
Warning
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
Plastic case .................................................................1
Side handle .................................................................1
Hammer Grease A ......................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
Drilling anchor holes
Drilling holes in concrete
Hammering only function
Crushing concrete, chipping, digging, and squaring
(Some applications need optional accessories)
SPECIFICATIONS
The speci cations of this machine are listed in the Table on
page 126.
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
Action Figure Page
Inserting SDS-MAX tools 22
Removing SDS-MAX tools 32
Changing tool direction 4 2
Selecting the operating mode 5 3
Installing the side handle 6 3
Switching on and o 73
Speed change*110 4
Installing the stopper 11 4
Mounting core bit 12 5
Mounting guide plate and center pin 13 5
Selecting accessories*2127, 128
*1 When drilling fragile materials, or when conducting
chipping operations or alignment operations, change
the tool’s rotation speed in accordance with the task by
using the rotation speed selector switch.
NOTE
While the tool’s motor is operating, rotation speed
cannot be adjusted by pressing the rotation speed
selector switch.
To adjust rotation speed, switch o the tool. Once the
motor has stopped, press the rotation speed selector
switch to adjust the speed.
*2 For detailed information regarding each tool, contact a
HiKOKI authorized service center.
Operate this Rotary Hammer by utilizing its own weight. The
performance will not be better even if it is pressed or thrust
forcibly against the work surface.
Hold this Rotary Hammer with a force just su cient to
counteract the reaction.
Warming up (Fig. 14)
The grease lubrication system in this unit may require
warming up in cold regions.
Position the end of the bit so makes contact with the
concrete, turn on the switch and perform the warming
up operation. Make sure that a hitting sound is produced
and then use the unit.
CAUTION
When the warming up operation is performed, hold the
side handle and the main body securely with both hands
to maintain a secure grip and be careful not to twist your
body by the jammed drill bit.
00BookDH40MEY2.indb800BookDH40MEY2.indb8 2023/06/1316:35:252023/06/1316:35:25
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki DH40MEY2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki DH40MEY2 in the language / languages: All languages as an attachment in your email.

The manual is 19.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info