Manual Hikoki CS33EDT (page 9 of 80) (English, German, Dutch, French, Italian, Portuguese, Spanish)

816440

Zoom out

Zoom in

1/80

English

Maintenance safety

○ Maintain the unit/machine according to recommended procedures.

○ Disconnect the spark plug before performing maintenance

except for carburetor adjustments.

○ Keep others away when making carburetor adjustments.

○ Use only genuine HiKOKI replacement parts as recommended

by the manufacturer.

CAUTION

Do not disassemble the recoil starter. You may get a possibility

of personal injury with recoil spring.

WARNING

Improper maintenance could result in serious engine damage or

in serious personal injury.

Transport and storage

○ Carry the unit/machine by hand with the engine stopped and the

muﬄ er away from your body.

○ Allow the engine to cool, empty the fuel tank, and secure the

unit/machine before storing or transporting in a vehicle.

○ Empty the fuel tank before storing the unit/machine. It is

recommended that the fuel be emptied after each use. If fuel is

left in the tank, store so fuel will not leak.

○ Store unit/machine out of the reach of children.

○ Clean and maintain the unit carefully and store it in a dry place.

○ Make sure ignition switch is oﬀ when transporting or storing.

○ When transporting or storage, cover chain with guide bar cover.

If situations occur which are not covered in this manual, take care

and use common sense. Contact HiKOKI Authorized Service

Centers if you need assistance. Pay special attention to statements

preceded by the following words:

WARNING

Indicates a strong possibility of severe personal injury or loss of

life, if instructions are not followed.

CAUTION

Indicates a possibility of personal injury or equipment damage, if

instructions are not followed.

NOTE

Helpful information for correct function and use.

WARNING

KICKBACK DANGER (Fig. 1)

One of the most severe dangers when working with a chain saw is

the possibility of kickback. Kickback may occur when the upper tip

of the guide bar touches an object, or when the wood closes in and

pinches the saw chain in the cut. Tip contact in some cases may

cause a lightning fast reverse reaction, kicking the guide bar up and

back toward you. Pinching the saw chain along the top of the guide

bar may also push the guide bar rapidly back towards you. Either of

these reactions may cause you to lose control of the saw which could

result in serious personal injury. Even though your saw has safety

built into its design, you should not rely on these safety features

exclusively. Know where your bar tip is at all times. Kickback does

occur if you allow the kickback zone (1) of the bar to touch an object.

Do not use that area. Kickback from pinching is caused by a cut

closing and pinching the upper side of the guide bar. Study your cut

and make sure it will open as you cut through. Maintain control when

the engine is running by always keeping a ﬁ rm grip on the saw with

your right hand on the rear handle, your left hand on the front handle

and your thumbs and ﬁ ngers encircling the handles. Always hold the

saw with both hands during operation and cut at high engine speed.

000BookCS33EDTWE.indb8000BookCS33EDTWE.indb8 2018/02/1911:12:042018/02/1911:12:04

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CS33EDT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 16.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hikoki CS33EDT Manual

Product: