816328
7
Zoom out
Zoom in
Previous page
1/332
Next page
7
English
(Original instructions)
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CS1825DC: Cordless Chain Saw
To reduce the risk of injury, user must read
instruction manual.
Do not use a power tool in the rain and
moisture or leave it outdoors when it is raining.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Always wear eye, head and ear protectors
when using this unit.
Beware of chain saw kickback and avoid
contact with bar tip.
Always use chain saw two-handed.
It is important that you wear the protective
clothing for feet, legs, hands, fore-arms and
head.
This chain saw is for use by trained tree service
operator only. Use without proper training can
result in severe injuries.
Chain oil delivery rate adjustment
Disconnect the battery
WHAT IS WHAT? (Fig. 1)
A: Battery (sold separately): Power source to drive the
unit.
B: Switch: Device activated by the nger.
C: Lock-o lever: Lever that prevents the accidental
operation of the trigger.
D: Chain brake: Device for stopping or locking the saw
chain.
E: Side cover: Protective cover to the guide bar, saw
chain, clutch and sprocket when the chain saw is in
use.
F: Nut: Nut for securing side cover.
G: Tensioning screw: Device for adjusting tension of saw
chain.
H: Front handle: Support handle located at or towards the
front of the main body.
I: Rear handle (Top handle): Support handle located on
the rear of the main body.
J: Saw chain: Chain, serving as a cutting tool.
K: Guide bar: The part that supports and guides the saw
chain.
L: Oil tank cap: Cap for closing the oil tank.
M: Oil sight glass: Window to check chain oil amount.
N: Hook: Tool for hanging the unit with rope etc.
O: Oil feeder: Container for oil.
P: Chain case: Case for covering the guide bar and saw
chain when the unit is not being used.
Q: Combi box spanner: The tool for removing or installing
a side cover and tensioning the saw chain.
WARNING
This chain saw (CS1825DC) is designed especially
for tree care and surgery. Only persons trained in
tree care and surgery may use this saw. Observe all
literature, procedures and recommendations from
the relevant professional organization. Failure to do
so constitutes a high accident risk. We recommend
always using a rising platform for sawing in trees.
Rappelling techniques are extremely dangerous and
require special training. The operator must be trained
in and familiar with the use of safety equipment and
working and climbing techniques. Always use the
restraining equipment for both the operator and the
saw.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings, instructions, illustrations
and speci cations provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
00BookCS1825DCEU.indb700BookCS1825DCEU.indb7 2022/12/0117:02:522022/12/0117:02:52
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki CS1825DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CS1825DC in the language / languages: All languages as an attachment in your email.

The manual is 18.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info