816394
4
Zoom out
Zoom in
Previous page
1/120
Next page
4
English
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the below.
Blades (No. 41) .......................................................... 1
Refer to Table 1 for use of the blades.
Hexagon bar wrench ................................................... 1
Splinter guard ............................................................. 1
Dust collector ..............................................................1
Chip cover ...................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various lumber and pocket cutting
Cutting mild steel plate, aluminum plate, and copper
plate
Cutting synthetic resins, such as phenol resin and vinyl
chloride
Cutting thin and soft construction materials
Cutting stainless steel plate (with No. 97 blade)
SPECIFICATIONS
Voltage (by areas) * (110 V, 115 V, 120 V, 127 V,
220 V, 230 V, 240 V)
Power Input * 720 W
Max. cutting depth Wood 110 mm
Mild steel 10 mm
No-load speed * 850 3000 min-1
Stroke 2.6 mm
Min. cutting radius 25 mm
Weight (without cord) ** CJ110MV: 2.4 kg
CJ110MVA: 2.3 kg
* Be sure to check the nameplate on product as it is subject
to change by areas.
**According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
Action Figure Page
Changing blades 1 110
Adjusting the blade operating speed 2 110
Switch operation 3 110
Adjusting the orbital operation 4 111
Housing the hexagonal bar wrench 5 111
Splinter guard 6 111
Sub base 7 111
Chip cover 8 111
Lighting up the lamp 9 112
Rectilinear cutting 10 112
Cutting a circle or a circular arc 11 112
Cutting metallic materials 12 112
Angular cutting 13 113
Pocket cutting 14 113
Concerning cutting of stainless steel
plates* 15 113
Connecting with cleaner 16 113
Selecting accessories 114
*NOTE
Dial scale reading is for reference only. The higher the
speed is, the quicker the material is cut. But the service
life of the blade will be reduced in this case. When the
speed is too low, cutting will take longer, although the
service life will be prolonged. Make adjustments as
desired.
When cutting use cutting uid (oil base cutting uid) to
prolong the blade’s service life.
SELECTION OF BLADES
Accessory blades
To ensure maximum operating e ciency and results, it is
very important to select the appropriate blade best suited to
the type and thickness of the material to be cut. The blade
number is engraved in the vicinity of the mounting portion
of each blade. Select appropriate blades by referring to
Table 1.
MAINTENANCE AND INSPECTION
1. Inspecting the blade
Continued use of a dull or damaged blade will result in
reduced cutting e ciency and may cause overloading of
the motor. Replace the blade with a new one as soon as
excessive abrasion is noted.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws be
loose, retighten them immediately. Failure to do so could
result in serious hazard.
3. Maintenance of the motor
The motor unit winding is the very “heart” of the power
tool. Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
4. Inspecting the carbon brushes
For your continued safety and electrical shock protection,
carbon brush inspection and replacement on this tool
should ONLY be performed by a HiKOKI AUTHORIZED
SERVICE CENTER.
0000BookCJ110MV.indb40000BookCJ110MV.indb4 2022/02/0114:32:192022/02/0114:32:19
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki CJ110MV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CJ110MV in the language / languages: All languages as an attachment in your email.

The manual is 10.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info