816434
7
Zoom out
Zoom in
Previous page
1/84
Next page
English
7
(Original instructions)
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Backpack Brush Cutter
Blade thrust may occur when the spinning
blade contacts a solid object in the critical area.
A dangerous reaction may occur causing the
entire unit and operator to be thrust violently.
This reaction is called blade thrust. As a result,
the operator may lose control of the unit which
may cause serious or fatal injury. Blade thrust is
more likely to occur in areas where it is di cult
to see the material to be cut.
It is important that you read, fully understand
and observe the following safety precautions
and warnings. Careless or improper use of the
unit may cause serious or fatal injury.
Read, understand and follow all warnings and
instructions in this manual and on the unit. Hot Surface – Contact with hot surface can
cause serious burns.
Always wear eye, head and ear protectors when
using this unit. Indicate handle location. Do not attach handle
above this point.
Keep all children, bystandards and helpers
15 m away from the unit. If anyone approaches
you, stop the engine and cutting attachment
immediately.
Pull out flexible shaft from cover and
grease every 15-20 hours of use.
Insufficient lubrication will cause flexible
shaft damage.
CAUTION
CAUTION
Pull out exible shaft from cover and grease
every 15-20 hours of use.
Insu cient lubrication will cause exible shaft
damage.
Be careful of thrown objects. Displacement
min-1
Shows maximum shaft speed. Do not use the
cutting attachment whose max rpm is below the
shaft rpm. Spark plug
Gloves should be worn when necessary, e.g.,
when assembling cutting equipment. Idle Idling speed
Use anti-slip and sturdy footwear. Speed of output shaft
Choke – Run position (Open) PMax. engine output
Choke – Start position (Closed) Fuel tank capacity
On/Start Dry weight (without fuel, cutting attachment,
harness and cutting attachment guard)
O /Stop Cutting attachment
Fuel and oil mixture
LpA, eq
ISO22868
Sound pressure level LpA by ISO 22868
Equivalent*
Idle speed adjustment
LWA, Ra(M)
2000/14/EC
Measured sound power level LwA by 2000/14/
EC
Racing
Priming pump
LWA, Ra(G)
2000/14/EC
Guaranteed sound power level LwA by 2000/14/
EC
Racing
Guaranteed sound power level
ahv, eq(F)
Vibration level by ISO 22867
Front or Left handle / Equivalent*
000BookCG40EAF(LP)WE.indb7000BookCG40EAF(LP)WE.indb7 2019/01/1811:28:422019/01/1811:28:42
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki CG40EAF(LP) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CG40EAF(LP) in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info