816209
10
Zoom out
Zoom in
Previous page
1/380
Next page
English (Original instructions)
10
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CG18DA(L):
Cordless Brush Cutter
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Disconnect battery before maintenance
Always wear eye protection.
Always wear hearing protection.
Do not use a power tool in the rain and moisture
or leave it outdoors when it is raining.
Beware of thrown objects
The distance between the machine and
bystanders shall be at least 15 m (50 ft)
Wear head protection
Wear hand protection
Wear slip-resistant footwear
Beware of blade thrust
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Max
8,000 min-1
Shows maximum shaft speed. Do not use the
cutting attachment whose max rpm is below the
shaft rpm.
Indicate handle location. Arrows which show
limits for handle positioning.
Direct current
V
Rated voltage
n0
No-load speed
Switching ON
Switching OFF
Eco mode
Normal mode
Power mode
Power switch
Mode switch
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
WHAT IS WHAT?
The names of parts in the list below correspond to Fig.1.
A: Lever: Trigger for activating the unit.
B: Lock lever: Lever that prevents the accidental operation
of the trigger.
C: Motor: Battery-driven motor.
D: Guard: Protects operator from flying debris.
E: Battery (sold separately): Power source to drive the
unit.
F: Power switch: Switch for switching the units power
unit's power ON or OFF.
G: Mode switch: Switch for adjusting the speed of the
motor.
H: Hanger: Used for attaching a shoulder belt to the unit.
I: Loop handle
J: Cutting attachment (Blade)
K: Shoulder belt: Harness with release mechanism.
L: Combi box spanner
2023/09/08 13:57:15Stylesheet: EU Version: 2023.8.18
CG18DA(L)_C99750571_311_EU
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki CG18DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CG18DA in the language / languages: All languages as an attachment in your email.

The manual is 6.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info