816321
12
Zoom out
Zoom in
Previous page
1/332
Next page
12
English
Display panel
Remaining battery indicator switch
Remaining battery indicator lamp
Rubber cover
USB port
USB cable
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CB3612DA: Cordless Band Saw
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Direct current
V Rated voltage
Switching ON
Switching OFF
Disconnect the battery
Tighten band saw blade
Loosen band slaw blade
Number of teeth/inch
Direction of band saw blade rotation
Lock
Unlock
Prohibited action
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
NOTE
To prevent the battery power consumption caused by
forgetting to turn o the LED light, the light goes o
automatically in about 3 seconds.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 320.
NOTE
Battery and battery charger are not included with this
product.
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various types of soft steel materials including
conduit pipes, stainless steel pipes, lining steel pipes
and steel rods
Cutting nonferrous metal materials including power and
communication cables and aluminum window frames
Cutting plastic (thermoplastic material cannot be cut as
the band saw blade may become wedged in the material
which is prone to melting when heated by cutting friction
SPECIFICATIONS
1. Power tool
Model CB3612DA
Voltage 36 V
No-load
speed
Standard
Mode (1-5) 1.0–3.2 m/s
(60 m/min – 195 m/min)
Auto Mode
(A) 2.0 m/s
(120 m/min)
Band Saw blade
dimensions 12.5 mm (W) × 0.5 mm (T) ×
1140 mm (L)
Max. sawing
dimension
Round pipe External diameter 120 mm
Square pipe 127 mm (W) × 120 mm (H)
Battery available for this
tool* Multi volt battery
Weight** 7.5 kg (BSL36B18)
* Existing batteries (BSL3660/3620/3626, BSL18xx
series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
00BookCB3612DA.indb1200BookCB3612DA.indb12 2022/07/0116:48:452022/07/0116:48:45
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki CB3612DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CB3612DA in the language / languages: All languages as an attachment in your email.

The manual is 19.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info