816378
13
Zoom out
Zoom in
Previous page
1/168
Next page
13
English
SPECIFICATIONS
Model C6MEY2
Voltage 230 V
Power Input 1050 W
No-Load Speed 4500 min-1 (Power mode)
2000 min-1 (Silent mode)
Capacity Cutting
depth
90° 66 mm
45° 46 mm
-5° 57 mm
Weight* 2.9 kg
* According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
Electronic control
Soft-start
Overload protection
This protection feature cuts o the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate causes
of overloading.
After that you can use it again.
Overheat protection
This protection feature cuts o the power to the motor
and stops the power tool in the event of overheating of
motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down in a
few minutes.
After that you can use it again.
Rotation speed changeover function (Power mode /
Silent mode)
MOUNTING AND OPERATION
Action Figure Page
Inclined cutting using the guide
(+45° direction) 93
Inclined cutting using the guide
(–5° direction) 10 3
Fine tuning of parallelism of base sides
and saw blade 11 3
Fine tuning of inclination angle
(When 90°) 12 4
Fine tuning of inclination angle
(When 45°) 13 4
Fine tuning of guide piece position 14 5
Adjusting the cutting depth 15 5
Cutting line 16 5
Switch operation 17 5
About the mode select function *1 18 5
Using the LED light 19 5
Using the cord holder 20 6
Attaching the long guide
(sold separately) 21 6
Attaching the guide 22 6
Attaching the uorine plate
(sold separately) 23 6
Cutting at right angles 24 6
Inclined cutting (+45° direction) 25 7
Inclined cutting (–5° direction) 26 7
Dismounting the saw blade 27 8
Mounting the saw blade 28 8
Selecting accessories 159
*1 About the mode select function
Each time the mode selector switch is pushed, the
operation mode changes.
When Silent mode is selected, the Silent mode indicator
lamp lights up.
Silent mode reduces maximum motor RPM enabling
e cient work with less noise.
If the load increases while the motor is operating in
Silent mode, it automatically changes to Power mode.
Additionally, if the load decreases again, it automatically
returns to Silent mode.
In Power mode, no change is made to Silent mode even
when the load decreases.
Mode No-load speed
Power 4500 min-1
Silent 2000 min-1
NOTE
You cannot change the mode unless the power plug is
connected to a receptacle and the switch is pulled once.
Even if the switch is turned on and o or the power plug
is disconnected and connected, this unit will maintain the
mode that you set.
LED LIGHT WARNING SIGNALS
This product features functions that are designed to protect
the tool itself. While the switch is pulled and 3 seconds after
its release, if any of the safeguard functions are triggered
during operation, the LED light will blink as described in
Table 1. When any of the safeguard functions are triggered,
immediately remove your nger from the switch and follow
the instructions described under corrective action.
Table 1
Safeguard
Function LED Light Display Corrective
Action
Overburden
Protection
On 0.1 second/
o 0.1 second Remove the
cause of the
overloading.
Temperature
Protection
On 0.5 second/
o 0.5 second Allow the tool
and battery to
thoroughly cool.
0000BookC6MEY2.indb130000BookC6MEY2.indb13 2022/11/1516:14:222022/11/1516:14:22
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki C6MEY2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki C6MEY2 in the language / languages: All languages as an attachment in your email.

The manual is 13.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info