816213
19
Zoom out
Zoom in
Previous page
1/272
Next page
English
19
Symptom Possible cause Remedy
Cannot reverse incline The incline lever (front) and incline
wing nut (rear) are not loosened. Try inclining after loosening the
incline lever (front) and incline wing
nut (rear).
Parallelism cannot be fine tuned The M5 hexagon socket set screw
holding the gear cover hinge needs to
be loosened.
Loosen the M5 hexagon socket set
screw holding the gear cover hinge.
Doesn’t cut well The saw blade is worn or missing
teeth. Replace with a new saw blade.
The bolt is loose. Firmly tighten the bolt.
The saw blade is installed
backwards. Install the saw blade in the proper
direction.
Switch can’t be pulled The switch lock is not pushed in
enough. Push the switch lock in all the way.
Sawdust discharge is poor Sawdust has accumulated in the saw
cover. Remove the sawdust inside the saw
cover.
2023/08/01 12:32:25Stylesheet: EU Version: 2023.7.24
C1805DA_C99750471_308_EU
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki C1805DA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki C1805DA in the language / languages: All languages as an attachment in your email.

The manual is 6.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info