627322

High Tech Health Circulation Booster Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
10
11
Visit our website for accessories and great innovative health products
How to use the Remote Control
The remote control allows you to sit back and relax
without having to bend over to operate the device.
It is important to always aim the remote control
towards the LCD display on the device as this is
where the IR receiver is located.
The buttons are quite self explanatory and match the
buttons on the device as explained in earlier sections of
the user’s manual. A “mute” button however has been
added to stop the beeping of the device as it progresses
automatically through the programmes.
Personalised setting
1. The device is pre-set to run for 30 minutes and rotate
through a series of beneficial programmes each minute.
2. To alter the time duration of the treatment, use the
‘+’ or ‘-‘ buttons next to ‘TIME’ on the device control
panel or remote control.
3. If during treatment a particular programme is preferred,
you can choose to keep that programme constantly running
by pressing off the ‘AUTO’ button on the device or remote
control. However, we recommend keeping the auto button
on for optimal results and to avoid over-stimulation of
particular muscles.
Technical Specifications
NAME OF PRODUCT Circulation Booster
MODEL CBV3
FREQUENCY 1Hz – 50Hz
OUTPUT CURRENT
Max 9mA
WEIGHT 1.6kg
DIMENSION 356(W)356(H)x68(D)(mm)
POWER CONSUMPTION 5W
AC ADAPTOR CE Approved
POWER SOURCE
INPUT (ADAPTOR USED) 100-240V AC, 50-60H
OUTPUT 5v DC, 1000mA
Q: Does the device vibrate?
A:
The Circulation Booster
®
device
is not a foot massager and does
not vibrate. Instead it sends mild
electrical impulses to stimulate the
nerves of your soles which contract
and relax your calf muscles. When
your bare feet are placed on separate
foot pads at the same time, your body
creates the circuit between the left
and right foot pad and the stimulation
will commence.
Q: What intensity level should I use?
A: Everyone is different and will react
differently to the intensity level
settings (e.g. someone may feel
the stimulation on setting 1 while
others on setting 60 or higher). It is
advisable to start off on a low setting
and work up slowly until you can
feel the mild electrical impulses
in your feet and the muscles in the
calf visibly pulsing or twitching but
at a level that is not uncomfortable.
If your feet lift off the device or
your legs ache after use, you have
probably had the intensity level on too
high a setting. Rest the legs and next
time use a lower intensity level.
Q: The stimulation is stronger in
one foot than the other. Is there
something wrong with the foot pad?
A: The intensity output in both foot pads
is exactly the same. However, both
feet and legs are never exactly the
same and the nerves in one foot or
leg may be more sensitive than the
other. Set the intensity to a level that
is comfortable in the good (or more
sensitive) foot. The other foot will still
be receiving the therapy despite the
lack of sensation.
Q: My foot is too small / big for the foot
pad. Does this matter?
A: No, this is not a problem. Just ensure
that as much of the soles of both
your bare feet are touching the foot
pads so you will be able to create the
circuit and have a therapy.
Q: Previously I could feel the
stimulation on a much lower
intensity but now I have to increase
the intensity a lot more. Is there
something wrong with my machine?
A: No, nothing has changed with the
output of your machine. It is common
that with regular use you will be able
to comfortably increase the intensity.
The device has a broad intensity
range (1 – 99) and everyone should
feel the stimulation in this range
if used correctly. Dehydration,
cold or dry skin can also affect
the intensity. Ensure you are well
hydrated with water and use a
liberal amount of heel balm on
your feet to improve conductivity.
Frequently Asked Questions
6


Need help? Post your question in this forum.

Forumrules
1

Forum

high-tech-health-circulation-booster

Reset search

  • Ihave received an english machine from my friend who's dead last november but i need to change the electric accessory socket to be able to use electrods for my back's pein. do yOU have them for french use ? Submitted on 20-10-2023 at 10:18

    Reply Report abuse

  • Haven't used it for awhile, when I go through the start procedures there's no elect. jolt to my feet, ie., there doesn't appear to be any elect. current from the feet pads. Submitted on 22-7-2023 at 17:28

    Reply Report abuse

  • Haven't used it for awhile, I've gone through the start up but it give the current jolt ie., doesn't appear to be any elect. current going through the feet pads. Submitted on 22-7-2023 at 17:26

    Reply Report abuse

  • I have used the model CB-V3 for many years but not the contac pads. I have Ostio Arthritus in both knees and my Docter said use the contact pads as I have no hope of knee surgery (87 years old) but cannot find the pads original pads. Where can I purchase the contact pads? Submitted on 21-2-2023 at 04:13

    Reply Report abuse

  • Circulation Booster CB-V3 The lead wires and Tens pads have been lost and I would like to replace them. Does anyone know what size the lead wire plugs to snap on connectors should be?
    Thanks so much. Submitted on 22-9-2022 at 02:33

    Reply Report abuse

  • I purchased a circulation booster off marketplace and was told that it had never been used but it won't turn on and we have not got a manual for it to try to work out the problem . New batteries in remote and power outlets work.
    Submitted on 12-9-2022 at 01:59

    Reply Report abuse

  • i seem to be missing a part that fits into accessory socket. What is this part and is it necessary ? Submitted on 3-9-2022 at 12:13

    Reply Report abuse

  • is this machine suitable for Diabetes and if it is what is the recommended intensity to use Submitted on 12-5-2022 at 12:04

    Reply Report abuse

  • Problem is I don't have the user manual,so I don't have the correct information about settings
    Submitted on 8-5-2022 at 22:28

    Reply Report abuse

  • Hi we have a High Tech Health Circulation Booster v.2 Can we get a service for the machine? 1. The impulses are not as strong as they used to be. 2. Sometimes, though plugged in, the machine does not turn on - this is sporadic. Submitted on 10-4-2022 at 03:32

    Reply Report abuse

    • Hi, Do you have the user manual? I would love a copy of it please. I can only find the V3 manual.
      Thanks Answered on 27-11-2022 at 14:36

      Vote up Report abuse

  • how can i get replacement accesories,ten pads,lead.instrutions. Submitted on 17-3-2022 at 19:24

    Reply Report abuse

  • I have been using the hi tech health circulation booster for 8 weeks now is it safe to use as I have a pacemaker fitted? Submitted on 27-2-2022 at 20:43

    Reply Report abuse

  • M Y booster has been working fine but now the vibration has stopped I a. 88 this year and unable to walk and the booster helps my circulation Submitted on 22-2-2022 at 12:37

    Reply Report abuse

  • machine lights up everywhere but no action on foot pads Submitted on 19-1-2022 at 04:03

    Reply Report abuse

  • What is meant to go in the small compartment under the rear of the machine where it says "please do not open after insertion". There appears to be nothing in it that has been inserted. Submitted on 9-1-2022 at 13:29

    Reply Report abuse

  • An I use the circulation booster if I have had scelotherapy Submitted on 31-10-2021 at 02:02

    Reply Report abuse

  • I have had sceiatherapy is this circulation able to be used on my legs Submitted on 31-10-2021 at 01:37

    Reply Report abuse

  • New cord lights up but will not start what do i need to do please Submitted on 20-9-2021 at 04:32

    Reply Report abuse

  • How do I get a new lead
    For my high tech circulation booster

    Submitted on 8-12-2020 at 21:32

    Reply Report abuse

  • Where can i get my v3 circulation booster repaired Submitted on 16-11-2020 at 17:57

    Reply Report abuse

  • Used this yesterday, it was fine. Today no power. Submitted on 12-10-2020 at 21:51

    Reply Report abuse

  • Hi we have not used the machine for several years and although we have found a lead that fits we are not sure its the right one, also we need a copy of the manual Submitted on 31-8-2020 at 21:47

    Reply Report abuse

  • Hi,
    Where can I order new Electrode Pads for the Circulation Booster?
    Regards,
    Hans Olsson Submitted on 17-5-2018 at 16:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for High Tech Health Circulation Booster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of High Tech Health Circulation Booster in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info