819504
3
Zoom out
Zoom in
Previous page
1/4
Next page
GB
DE
Für den Zeltaufbau sind 2 Personen von Vorteil. Breiten Sie das Zelt flach auf dem Boden aus. Steine,
Äste und andere spitze Gegenstände sollten vorher entfernt werden. Die Reißverschlüsse müssen
geschlossen sein.
Stecken Sie die Gestänge A und B zusammen. Führen Sie die Gestängebögen durch die Tunnel. Um den
Aufbau zu erleichtern lösen Sie die Spannschnalle A1 und fixieren Sie die Gestänge mittels der
angebrachten Stifte.
Spannen Sie die Zelthaut mittels der verstellbaren Gurtbänder (A1).
Befestigen Sie die Gestänge- Clipse am Gestänge.
Richten Sie das Zelt mit geschlossenen Reißverschlüssen auf. Bringen Sie das Zelt in Position und
verankern Sie es im Boden: Beginnen Sie an den Eckpunkten und spannen Sie diese mittels Heringen ab.
Fixieren Sie die verbleibenden Abspannpunkte mittels Erdnägeln im Boden. Verbinden Sie das Vorzelt
mittels Reißverschluss ans Hauptzelt und spannen Sie dieses ab.
Öffnen Sie den Eingang und legen Sie die Innenzelte, wie im Grundriss angegeben, aus. Achten Sie
darauf, dass die Eingänge übereinstimmen.
Befestigen Sie die Innenzelte mittels Knebel am Außenzelt.
Fixieren Sie den separaten Zeltboden und die Innenzelte mittels Erdnägeln im Boden.
Befestigen Sie die restlichen Abspannleinen und spannen Sie das Zelt mit geschlossenen
Reißverschlüssen und mittels Heringen ab.
Befestigen Sie das Vorbau- Überdach mittels Haken am Gestänge.
Fixieren Sie das Firstgestänge C in den innen angebrachten Gestängetaschen des Hauptzeltes.
Achten Sie darauf, dass nicht zu viel Spannung auf dem Zelt ist.
Two persons are recommended to erect the tent.
Spread out the fly sheet on clean and even surface. Ensure that the zippers are closed.
Fit the pole sections A and B together. Thread the poles through the sleeves. To relieve the set up, open
the adjustable buckle A1, fix the poles into the provided eyelets.
Stretch the fly sheet by using the adjustable webbing's A1.
Fix the pole clips onto the poles.
Raise the tent with closed zippers. Position the tent and anchor the fly sheet: Start to fix each corner with
provided stakes. Connect the fly sheets by zipper. Fix the remaining pegging points with provided pegs.
Open the fly sheet and lay out the inner tents corresponding to the ground sketch.
Make sure that the entrance of inner tent match to outer tent.
Fix the inner tents by using the provided toggles.
Peg down the inner tents and the ground floor with provided pegs.
Secure the guy ropes with provided stakes. (Closed entrances).
Fix the Sun canopy roof by using the provided hooks onto the steel pools.
Fix the ridge pole C in the provided pole pockets inside of the fly sheet.
Do not allow too much tension to the fly sheet.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for High Peak Paros 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of High Peak Paros 6 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info