700145
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
FUNCTIONAL INSTRUCTIONS
FEATURES AND OPERATIONAL CONTROLS
2
6
1
3
4
5
The BASS LEVEL CONTROLLER port is for the enclosed bass remote in LP/BP mode. With this bass remote controller you
are able to adjust the bass level e.g. from the driver’s seat. Please connect only the enclosed bass remote controller and cable.
POWER/PROTECT
If the POWER LED lights up, the amplier is ready for operation.
If the PROTECT LED lights up, a malfunction is indicated. Refer in this case to the chapter TROUBLE SHOOTING.
The X-OVER CH3/4 switch selects the required operation mode of the amplier on the channels 1/2.
LP: Lowpass mode (The higher frequencies will be eliminated. Adjustable by the lowpass controller.)
HP: Highpass mode (The lower frequencies will be eliminated. Adjustable by the HP controller.)
FULL: Fullrange mode (The whole frequencies will be amplied).
The X-OVER CH3/4 switch selects the required operation mode of the amplier on the channels 1/2.
DUPE: This mode should be selected, if you want to run 2 subwoofers bridged in LP mode. The DUPE mode passes (duplicate)
the signal from CH3/4 to the line input section of CH1/2. All controllers and settings except the LEVEL controller are then without
function. The LINE IN RCAs of CH1/2 are deactivated.
HP: Highpass mode (The lower frequencies will be eliminated. Adjustable by the HP controller.)
FULL: Fullrange mode (The whole frequencies will be amplied).
The CH3/4 LP controller adjusts the cut-off point of the frequency range to above for the channels 3/4. The cut-off frequency is
continuously adjustable from 30 Hz to 250 Hz.
The INPUT MODE switch must be in 2CH position, if you connect only one RCA stereo audio cable with the CH1/2 line inputs.
Select the position 4CH, if you connect two RCA stereo audio cables with the CH1/2 and CH3/4 line inputs. The fader function
of your head unit works only in the 4CH mode.
If you have selected the 2CH mode, the input signal of LINE INPUT CH1/2 will be routed to the channels 3 and 4. This means
only one RCA stereo audio cable is required. When you operate two subwoofers, you can also use the subwoofer output from
the head unit in this conguration.
1 76 10 114 93 85
POWER INPUT SPEAKER OUTPUT
PROTECT
POWER
FULLHP
LP
HP LEVEL
BASS LEVEL
CONTROLLER
0dB 12dB
LINE OUT
X-OVER
MODE
10Hz 1.2kHz30Hz 250Hz
CH3
CH4
MIN MAX
10Hz 1.2kHz MIN MAX
GND +12VREM
FULLHPDUPE
BASS BOOST
LINE IN
CH1
CH2
2CH4CH
INPUT MODE
BRIDGED
CH4CH3
LP
BRIDGED
CH2CH1
VXi6404
FUSE
4CH MONO MIX
X-OVER MODE
CH3/4
CH1/2
VXi6404
2
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics VXi6404 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics VXi6404 in the language / languages: English, German as an attachment in your email.

The manual is 9,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info