700142
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
FUNCTIONAL INSTRUCTIONS
2
3
4
6
5
1
The optional BALANCED INPUT is unlike the regular RCA-cables insusceptible against interspersion and interferences of the
vehicle’s electronics. You need therefor a Balanced-Line-Transmitter with a special cable, which can be connected between the
head unit and the amplier. The Balance-Line-Transmitter is not included in delivery. Refer to the further information on page 29.
Never use the BALANCED INPUT and the RCA jacks LINE IN at the same time.
The LEVEL controller adjusts the input sensitivity of the amplier, to adjust the audio signal of the headunit. The input sensitivity
is adjustable from 6 Volts (MIN) to 0.2 Volts (MAX).
The PHASE controller allows to adjust the phasing between 0° and 180°. Hence, you are able to adjust the subwoofer perfect
to the vehicle’s acustics.
The SUB SONIC controller (Subsonic lter) limits the ultralow and not hearable frequencies of the audiosignal to below, to avoid
a mechanical and electical overloading on the subwoofer. The cut-off frequency is adjustable from 15 to 55 Hz and depends on
the size of the subwoofer. Is this controller adjusted higher that the LP controller, no sound is hearable.
The EXTENDED BASS CONTROL controllers allow a extensive adjustment of the bass frequencies.
The SUB BOOST controller denes the bass bosst from 0 to 12dB.
With the FREQ RANGE controller you are able to adjust, on which frequency the bass boost (SUB BOOST) is efctive.
The range goes from 20 to 80 Hz.
With the Q-CONTROL controller denes the Q-Factor of the crossover continuously, so that the playback quality of the cut-off
frequency can be adjusted. Thereby you are able to adjust perfect transitions between the loudspeakers.
WIDE equates a Q-Factor of Q 0,3 (arrow left below) = very wide frequency range.
NARROW equates a Q-Factor of Q 1,0 (arrow right below) = very narrow frequency range.
Q 0,5 / LINKWITZ-REILLY is the standard-setting, this means the arrow points up (12 o’clock position).
Q 0,7 / BUTTERWORTH is located at the arrow position right (3 o’clock position)
The LINE IN RCA jacks must be connected with the RCA output jacks of the headunit.
1 65 93 8 1074
PHASE
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
LP
SUB
SONIC
LEVEL
LINE IN
35Hz 250Hz15Hz 55Hz
GND +12VREM
FREQ.
RANGE
BALANCED
INPUT
R
L
VXi 2000 D
FUSE
BASS LEVEL
CONTROLLER
SUB
BOOSTQ-CONROL
0dB 12dBWIDE NRW20Hz 80Hz
EXTENDED BASS CONTROL
SLAVEMASTER
MODE
SLAVE IN
MASTER OUT
0° 180°MIN MAX
2 11
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics VXi3000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics VXi3000D in the language / languages: English, German as an attachment in your email.

The manual is 12,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info