700156
21
Zoom out
Zoom in
Previous page
1/24
Next page
25
26
21
SPECIFICATIONS|ENG
MODEL
CHANNELS
CIRCUIT
OUTPUT POWER RMS 13,8 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 4 Ohms mono bridged
OUTPUT POWER MAX. 13,8 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 4 Ohms mono bridged
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
Channel Separation
THD&N
Input Sensitivity
Input Impedance
X-Over Modes
Various Highpassfilter
Various Lowpassfilter
Bass Boost @ 50 Hz
Bass Remote
Line Outputs RCA
Fuse Ratings
Dimensions
Width x Height x Length
TSi400-II
2
CLASS A/B Analog
2 x 100
2 x 175
1 x 350
2 x 200
2 x 350
1 x 700
20Hz - 30 kHz
> 400
> 90 dB
> 60 dB
0,05%
6 - 0.2 V
> 47 kOhm
LPF/BPF - HPF - Full
10 - 1200 Hz
30 - 150 Hz
0 - 12 dB
BLC-TSi
Fullrange
2 x 20 A
220 x 55 x 250/315 mm
Technical specifications are subject to change!
Errors are reserved!
For damages on the vehicle and the device, caused
by handling errors of the device, we can’t assume
liability.
All HiFonics Amplifiers are tagged with a individual
serialnumber, which will be registerd for statistic
and service conditional purposes.
All HiFonics Amplifiers are tagged with a CE-
Certification Mark. Thereby these devices are
ceritified for a use inside vehicles inside the
European Union (EU).
WARRANTY DISCLAIMER
The limited warranty comply with legal regulations.
Failures or damages caused by overload, improper
use or by using the product for competitions are
not covered by the warranty.
Please return the defective product only with a
valid proof of purchase and a detailed malfunction
description.
TSI600-II
2
CLASS A/B Analog
2 x 150
2 x 275
1 x 550
2 x 300
2 x 550
1 x 1100
20Hz - 30 kHz
> 400
> 90 dB
> 60 dB
0,05%
6 - 0.2 V
> 47 kOhm
LPF/BPF - HPF - Full
10 - 1200 Hz
30 - 150 Hz
0 - 12 dB
BLC-TSi
Fullrange
4 x 15 A
220 x 55 x 300/365 mm
You can simplify the installation of the high level speaker connections, if you use the separately available hi-to-lo adaptors
HF-HLA from HiFonics. You may find the adaptor at your car audio retailer.
With the HF-HLA you just need to connect the bared speaker cables in the regarding ports and connect the RCA jacks with LINE IN on
the amplifier.
Please ensure the correct polarity of the connections.
Usually the ”+” positive cables are red or dark grey,
With one HF-HLA adaptor you are able to connect one channel pair,
this means for a 2-channel amplfier you need one adaptor.
OPTIONAL ACCESSORIES FOR HiFONICS TITAN TSi AMPLIFIERS
R
Speaker Cables
+
To the LINE IN on the Amp
+
L
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics TSi600-II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics TSi600-II in the language / languages: English, German as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info