700167
15
Zoom out
Zoom in
Previous page
1/16
Next page
22
15
Trouble Shooting
POWER
This product is designed for operation with a 12 Volt DC, negative ground vehicle.
Too low voltage or wrong polarity may cause malfunctions.
SERVICE
Do not try and service these products yourself, seek only a qualified service center or factory service center.
DAMAGES
Be careful not to drop or apply undue pressure to the frontpanel of your video monitor.
If the screen cracks due to misuse your warranty will be void!
CHECK-POINTS
1. The operating temperature of this product is limited to -20°C- +80°C.
Your vehicle can reach temperatures up to 100° C in the summertime.
2. From time to time when your vehicle extremely hot or cold you must allow
for your air conditioner or heater to cool or heat the vehicle to operating
temperatures to return to normal operating ranges are achieved.
3. Your optimum picture quality is achieved when you are directly in front
of monitor (+/- 30 degrees).
1.
1.
1.
1.
Symptoms
Probable Causes
Solution
Little regular light
spots and color spots on the
screen or black horizontal line
in the picture
1. No 12 voltage
2. The A/V cable of the monitor is loose or is
damaged
1. Check if power is on or the connection is
unstable
2. Check the A/V cable
Black Screen but
Operation LED is illuminated
1. No Video-Signal
2. The A/V cable of the monitor is loose or is
damaged
3. Brightness or Contrast ratio is
too low
1. Check output signal of th Video Source
2. Check or replace A/V cable
3. Reset to factory settings via the OSD-Menu
1. Check output signal of th Video Source
2. Check or replace A/V cable
3. Increase Brightness or Contrast ratio
1. This is a principally "Symptom" in the usual
range for manufacturing standards of
LCD/TFT monitors.
Unclear Picture
1. Bad Quality of the Video Source
2. Brightness or Contrast ratio is
too low
1. Replace or change the disk
2 Brightness or Contrast ratio. Increase
1. No Color Signal from Video Source
2. The A/V cable of the monitor is loose or is
damaged
3. Color settings are wrong
Black Screen and
Operation LED is not illuminated
No Color
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics MX701S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics MX701S in the language / languages: English, German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info