700163
27
Zoom out
Zoom in
Previous page
1/32
Next page
12
RL RR
Connect the Stereo RCA outputs (FL/FR & RL/RR)
of the headunit withthe LINE IN CH1 / CH2
and CH3 / CH4 of the amplifier
FR FL
Speaker
left
2 – 8 Ohms
Speaker
right
2 – 8 Ohms
Switch setting CH1/2: HPF oder FULL
Switch setting CH3/4: LPF/BPF
Switch setting INPUT: 4 CH
INTERCONNECTION
Connect the RCA lineouts of the headunit with the RCA jacks LINE IN of the amplifier with appropriate high-value RCA cables.
If a separate SUB OUT from your headunit is available, use this for the LINE IN CH3/4 on the amplifier.
Connect the speakers with SPEAKER OUTPUT + CH 1 - and + CH 2 -, and the subwoofer with the SPEAKER OUTPUTS CH3/4
+ BRIDGED - of the amplifier.
Ensure by any means, that the total impedance load of all speakers per channelpair (CH1 & CH2) is not lower than 2 ohms and the total
impedance load of the subwoofer (CH3 & CH4) is not lower than 4 ohms. Too low impedance cause high temperature and will shut down
the amplifier operation.
INPUT SWITCH
• Select the 4CH position on the INPUT MODE switch. If there is only one RCA stereo audio cable from the headunit available, connect
the CH1/2 RCA line inputs and select the 2CH position.
CROSSOVER SETTINGS CH1/2 (STEREO SYSTEM)
• See the regarding notes on page 22.
LEVEL CONTROLLER CH1/2 (STEREO SYSTEM)
• See the regarding notes on page 22.
CROSSOVER SETTINGS CH3/4 (SUBWOOFER )
• See the regarding notes on page 23.
LEVEL CONTROLLER CH3/4 (SUBWOOFER )
• See the regarding notes on page 23.
BOOST CONTROLLER CH3/4 (SUBWOOFER )
• The BOOST controller adjusts the bass enhancement between 0db and +12dB.
• A too high bass boost may cause clipping/distortion and damage on the loudspeakers and also may harm your hearing abilities.
Use this controller carefully!
REMOTE BASS LEVEL CONTROLLER CH3/4 (SUBWOOFER )
The enclosed remote BASS LEVEL Controller adjusts the bass-level e.g. from the driver’s seat.
Please use only the enclosed controller and cable.
MERCURY IV|ENG
27
EXAMPLE 3-Channel Mode: 1 x Stereo System & 1 x Mono Subwoofer bridged
Subwoofer
4 – 8 Ohms
Connect the bass level
controller on the amplifier
with the enclosed cable.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics Mercury II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics Mercury II in the language / languages: English, German as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info