Manual Hifonics Mercury I (page 14 of 24) (English, German)

700162

Zoom out

Zoom in

1/24

THE PURCHASED DEVICE IS ONLY SUITABLE FOR AN OPER-

ATION WITH A 12V ON-BOARD ELECTRICAL SYSTEM OF A

VEHICLE. Otherwise fire hazard, risk of injury and electric shock

consists.

PLEASE DO NOT MAKE ANY OPERATION OF THE SOUND-

SYSTEM, WHICH DISTRACT YOU FROM A SAFE DRIVING.

Do not make any procedures, which demand a longer attention.

Perform these operations not until you have stopped the vehicle

on a safe place. Otherwise the risk of accident consists.

ADJUST THE SOUND VOLUME TO AN APPROPRIATE LEVEL,

THAT YOU ARE STILL ABLE TO HEAR EXTERIOR NOISES

WHILE DRIVING. High performance sound systems in vehicles

may generate the acoustic pressure of a live concert. The perma-

nent listening to extrem loud music may cause the loss of your

hearing abilities. The hearing of extreme loud music while driving

may derogate your cognition of warning signals in the traffic. In

the interests of the common safeness, we suggest to drive with

a lower sound volume. Otherwise the risk of accident consists.

DO NOT COVER COOLING VENTS AND HEATSINKS. Otherwise

this may cause heat accumulation in the device and fire hazard

consists.

DO NOT OPEN THE DEVICE. Otherwise fire hazard, risk of injury

and electric shock consists. Also this may cause a loss of the

warranty.

REPLACE FUSES ONLY WITH FUSE WITH THE SAME RA-

TING. Otherwise fire hazard and risk of electric shock consists.

DO NOT USE THE DEVICE ANY LONGER, IF A MALFUNCTION,

WHICH REMAINS UNREMEDIED. Attend in this case the chapter

TROUBLE SHOOTING. Otherwise risk of injury and the damage

of the device consists. Commit the device to an authorized retailer.

THE INSTALLATION OF A POWER CAPACITOR WITH SUF-

FICIENT CAPACITY IS RECOMMENDED. High performance

amplifiers cause high potential voltage drops and need a high

power consumption at a high volume level. To relieve the vehicle’s

on-board system, it is recommended to install a power capacitor

between the battery and the device which works as buffer. Consult

your car audio retailer for the appropriate capacity.

INTERCONNECTION AND INSTALLATION SHOULD BE AC-

COMPLISHED BY SKILLED STAFF ONLY. The interconnection

and installation of this device demands technical aptitude and

experience. For your own safness, commit the interconnexion

and installation to your car audio retailer, where you have purchased

the device.

DISCONNECT THE GROUND CONNECTION FROM THE

VEHICLE’S BATTERY BEFORE INSTALLATION. Before you

start with the installation of the sound system, disconnect by any

means the ground supply wire from the battery, to avoid any risk

of electric shock and short circuits.

CHOOSE A APPROPRIATE LOCATION FOR THE INSTALLA-

TION OF THE DEVICE. Look for a appropriate location for the

device, which ensures a sufficient air circulation. The best places

are spare wheel cavities, and open spaces in the trunk area. Less

suitable are storage spaces behind the side coverings or under

the car seats.

ENG|SAFETY INSTRUCTIONS

PLEASE CHECK THE FOLLOWING ADVICES BEFORE THE FIRST OPERATION!

DO NOT INSTALL THE DEVICE AT LOCATIONS, WHERE IT

WILL BE EXPOSED TO HIGH HUMIDITY AND DUST. Install

the device at a location, where it will be protected from high

humidity and dust. If humidity and dust attain inside the device,

malfunctions may be caused.

MOUNT THE DEVICE AND OTHER COMPONENTS OF THE

SOUND SYSTEM SUFFICIENTLY. Otherwise the device and

components may get loose and act as dangerous objects, which

could cause serious harm and damages in the passenger room.

DO NOT DAMAGE COMPONENTS, WIRES AND CABLES OF

THE VEHICLE WHEN YOU DRILL THE MOUNTING HOLES. If

you drill the mounting holes for the installation into the vehicle’s

chasis, ensure by any means, not to damage, block or tangent

the fuel pipe, the gas tank, other wires or electrical cables.

ENSURE CORRECT CONNECTION OF ALL TERMINALS. Faulty

connections may could cause fire hazard and lead to damages

of the device.

DO NOT INSTALL AUDIO CABLES AND POWER SUPPLY

WIRES TOGETHER. Attend while installation not to lead the audio

cables between the headunit and the amplifier together with the

power supply wires on the same side of the vehicle. The best is

a areal separated installation in the left and right cable channel

of the vehicle. Therewith a overlap of interferences on the audio

signal will be avoided. This stands also for the equipped bass-

remote wire, which should be installed not together with the power

supply wires, but rather with the audio signal cables.

ENSURE THAT CABLES MAY NOT CAUGHT UP IN CLOSE-

BY OBJECTS. Install all the wires and cables like described on

the following pages, therewith these may not hinder the driver.

Cables and wires which are installed close-by the steering wheel,

gear lever or the brake pedal, may caught up and cause highly

dangerous situations.

DO NOT SPLICE ELECTRICAL WIRES. The electrical wires

should not be bared, to provide power supply to other devices.

Otherwise the load capacity of the wire may get overloaded. Use

therefor a appropriate distribution block. Otherwise fire hazard

and risk of electric shock consists.

DO NOT USE BOLTS AND SCREW NUTS OF THE BRAKE

SYSTEM AS GROUND POINT. Never use for the installation or

the ground point bolts and screw-nuts of the brake system, steering

system or other security-relevant components. Otherwise fire

hazard consists or the driving safety will be derogated.

DO NOT BEND OR SQUEEZE CABLES AND WIRES BY SHARP

OBJECTS. Do not install cables and wires not close-by movable

objects like the seat rail or may be bended or harmed by sharp

and barbed edges. If you lead a wire or cable through the hole

in a metal sheet, protect the insulation with a rubber grommet.

KEEP AWAY SMALL PARTS AND JACKS FROM CHILDREN.

If objects like these will be swallowed, a risk of serious injuries

consists. Consult promtly a medical doctor, if a child swallowed

a small object.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics Mercury I in the language / languages: English, German as an attachment in your email.

The manual is 3,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hifonics Mercury I Manual

Product: