Manual Hifonics BRX1500D (page 17 of 32) (English, German)

700126

Zoom out

Zoom in

1/32

SAFETY INSTRUCTIONS

THE PURCHASED DEVICE IS ONLY SUITABLE FOR AN OPER-ATION

WITH A 12V ON-BOARD ELECTRICAL SYSTEM OF A VEHICLE. Other-

wise re hazard, risk of injury and electric shock consists.

PLEASE DO NOT MAKE ANY OPERATION OF THE SOUNDSYSTEM,

WHICH DISTRACT YOU FROM A SAFE DRIVING. Do not make any pro-

cedures, which demand a longer attention. Perform these operations not

until you have stopped the vehicle on a safe place. Otherwise the risk of

accident consists.

ADJUST THE SOUND VOLUME TO AN APPROPRIATE LEVEL, THAT

YOU ARE STILL ABLE TO HEAR EXTERIOR NOISES WHILE DRIVING.

High performance sound systems in vehicles may generate the acoustic

pressure of a live concert. The permanent listening to extrem loud music

may cause the loss of your hearing abilities. The hearing of extreme loud

music while driving may derogate your cognition of warning signals in the

trafc. In the interests of the common safeness, we suggest to drive with a

lower sound volume. Otherwise the risk of accident consists.

DO NOT COVER COOLING VENTS AND HEATSINKS. Otherwise this

may cause heat accumulation in the device and re hazard consists.

DO NOT OPEN THE DEVICE. Otherwise re hazard, risk of injury and

electric shock consists. Also this may cause a loss of the warranty.

REPLACE FUSES ONLY WITH FUSE WITH THE SAME RATING. Other-

wise re hazard and risk of electric shock consists.

DO NOT USE THE DEVICE ANY LONGER, IF A MALFUNCTION, WHICH

REMAINS UNREMEDIED. Refer in this case to the chapter TROUBLE

SHOOTING. Otherwise risk of injury and the damage of the device con-

sists. Commit the device to an authorized retailer.

THE INSTALLATION OF A POWER CAPACITOR WITH SUFFICIENT CA-

PACITY IS RECOMMENDED. High performance ampliers cause high po-

tential voltage drops and need a high power consumption at a high volume

level. To relieve the vehicle’s on-board system, it is recommended to install

a power capacitor between the battery and the device which works as buf-

fer. Consult your car audio retailer for the appropriate capacity.

INTERCONNECTION AND INSTALLATION SHOULD BE ACCOMPLIS-

HED BY SKILLED STAFF ONLY. The interconnection and installation of

this device demands technical aptitude and experience. For your own saf-

ness, commit the interconnexion and installation to your car audio retailer,

where you have purchased the device.

DISCONNECT THE GROUND CONNECTION FROM THE VEHICLE’S

BATTERY BEFORE INSTALLATION. Before you start with the installation

of the sound system, disconnect by any means the ground supply wire from

the battery, to avoid any risk of electric shock and short circuits.

CHOOSE AN APPROPRIATE LOCATION FOR THE INSTALLATION OF

THE DEVICE. Look for an appropriate location for the device, which ensu-

res a sufcient air circulation. The best places are spare wheel cavities, and

open spaces in the trunk area. Less suitable are storage spaces behind the

side coverings or under the car seats.

DO NOT INSTALL THE DEVICE AT LOCATIONS, WHERE IT WILL BE

EXPOSED TO HIGH HUMIDITY AND DUST. Install the device at a loca-

tion, where it will be protected from high humidity and dust. If humidity and

dust attain inside the device, malfunctions may be caused.

MOUNT THE DEVICE AND OTHER COMPONENTS OF THE SOUND

SYSTEM SUFFICIENTLY. Otherwise the device and components may get

loose and act as dangerous objects, which could cause serious harm and

damages in the passenger room.

ENSURE NOT TO DAMAGE COMPONENTS, WIRES AND CABLES OF

THE VEHICLE WHEN YOU DRILL THE MOUNTING HOLES. If you drill

the mounting holes for the installation into the vehicle’s chasis, ensure by

any means, not to damage, block or tangent the fuel pipe, the gas tank,

other wires or electrical cables.

ENSURE CORRECT CONNECTION OF ALL TERMINALS. Faulty con-

nections may could cause re hazard and lead to damages of the device.

DO NOT INSTALL AUDIO CABLES AND POWER SUPPLY WIRES TO-

GETHER. Ensure while installation not to lead the audio cables between

the head unit and the amplier together with the power supply wires on the

same side of the vehicle. The best is a areal separated installation in the left

and right cable channel of the vehicle. Therewith a overlap of interferences

on the audio signal will be avoided. This stands also for the equipped bass-

remote wire, which should be installed not together with the power supply

wires, but rather with the audio signal cables.

ENSURE THAT CABLES MAY NOT CAUGHT UP IN CLOSE-BY OB-

JECTS. Install all the wires and cables like described on the following pa-

ges, therewith these may not hinder the driver. Cables and wires which are

installed close-by the steering wheel, gear lever or the brake pedal, may

caught up and cause highly dangerous situations.

DO NOT SPLICE ELECTRICAL WIRES. The electrical wires should not be

bared, to provide power supply to other devices.Otherwise the load capa-

city of the wire may get overloaded. Use therefor a appropriate distribution

block. Otherwise re hazard and risk of electric shock consists.

DO NOT USE BOLTS AND SCREW NUTS OF THE BRAKE SYSTEM

AS GROUND POINT. Never use for the installation or the ground point

bolts and screw-nuts of the brake system, steering system or other security-

relevant components. Otherwise re hazard consists or the driving safety

will be derogated.

ENSURE NOT TO BEND OR SQUEEZE CABLES AND WIRES BY

SHARP OBJECTS. Do not install cables and wires not close-by movable

objects like the seat rail or may be bended or harmed by sharp and barbed

edges. If you lead a wire or cable through the hole in a metal sheet, protect

the insulation with a rubber grommet.

KEEP AWAY SMALL PARTS AND JACKS FROM CHILDREN. If objects

like these will be swallowed, the risk of serious injuries consists. Consult

promtly a medical doctor, if a child swallowed a small object.

PLEASE NOTE THE FOLLOWING ADVICES BEFORE THE FIRST OPERATION!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics BRX1500D in the language / languages: English, German as an attachment in your email.

The manual is 11,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hifonics BRX1500D Manual

Product: