167984
19
Zoom out
Zoom in
Previous page
1/28
Next page
2
7
1 3
6
5
4
HP 5 HP 5
21
3
456
Input Panel
1_A PRE IN: A channels preamplified inputs Right (R) and Left (L).Connect the outputs from the
preamplified section of the head unit or of an external electronic crossover.
When using HP 5 in 3 CH mode the A PRE IN drives both A & B channels outputs.
2_B PRE IN: B channels preamplified inputs Right (R) and Left (L).Connect the outputs from the
preamplified section of the head unit or of an external electronic crossover.
3_C PRE IN: C channel preamplified inputs Right (R) and Left (L).Connect the outputs from the
preamplified section of the head unit or of an external electronic crossover. You can use either
input or both as the amplifier performs the channels MIX to drive the C channel in mono.
4_A SPEAKER IN: A channels amplified signals inputs Right (R) and Left (L). Connect the outputs
from the head unit amplified section. When using HP 5 in 3 CH mode the A SPEAKER IN drives
both A & B channels outputs.
5_B SPEAKER IN: B channels amplified signals inputs Right (R) and Left (L). Connect the outputs
from the head unit amplified section.
6_C SPEAKER IN: C channel amplified signals inputs Right (R) and Left (L). Connect the outputs
from the head unit amplified section. You can use either input or both as the amplifier performs
the channels MIX to drive the C channel in mono.
CAUTION: Use SPEAKER IN input only with sources equipped with bridged output (BTL).
7_ HP RVC: Supplied Remote Bass Control connector input. This system equalizes the ultralow range.
Power Supply/Outputs/Other Functions Panel
1_ + BATT (11÷15 VDC): terminal block through the fuse holder supplied for the amplifier power
supply positive pole connection. The hole accepts cables up to 3 A.W.G. For the best current
transfer, we recommend the use of cables with as big a section as possible or, at least, with the
same section as the wire connected to the negative pole.
2_ GND: terminal block for the amplifier power supply negative pole connection. Insert the battery
negative cable or a wire connected to the vehicle chassis here. The hole accepts cables up to
3 A.W.G. For the best current transfer, we recommend the use of cables with as big a section as
possible or, at least, with the same section as the wire connected to the positive pole;
3_ REM: terminal for the Remote cable coming from the device which turns on the amplifier.
Voltage must be between 7 and 16,5 VDC.
4_ A CH SPEAKER OUTPUT: A channels speaker Right (R) and Left (Left) power terminals. The
hole accepts cable up to 10 A.W.G. When using HP 5 in 3 CH mode the output is available at
terminals L+ and R- (3CH LEFT).
5_ B CH SPEAKER OUTPUT: B channels speaker Right (R) and Left (Left) power terminals. The
hole accepts cable up to 10 A.W.G. When using HP 5 in 3 CH mode the output is available at
terminals L+ and R- (3CH RIGHT).
6_ C CH SPEAKER OUTPUT: C channel speaker + and - (Left) power terminals. The hole accepts
cable up to 10 A.W.G. Signal at C speaker output is mono.
Italiano | English
36 37
Manuale HP5 13-07-2007 17:35 Pagina 37
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hertz hp 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hertz hp 5 in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info