782146
21
Zoom out
Zoom in
Previous page
1/44
Next page
21
Sådana skadade elanslutningskablar får inte använ-
das och är på grund av isoleringsskadorna livsfar-
liga!
Kontrollera regelbundet skador på elanslutningskabeln.
Var vid kontrollen noga med att anslutningskabeln inte är
kopplad till strömnätet.
Elanslutningskablar måste följa de tillämpliga VDE och
DINbestämmelserna. Använd endast anslutningskablar
med H07RNmärkning.
Påtryckt typbeteckning på anslutningskabeln är föreskri-
ven.
Växelströmsmotor
Nätspänningen måste hålla 230–240 V/50 Hz.
Förlängningskablar måste ha ett minsta kabeltvärsnitt
om 1,0 kvadratmillimeter.
Nätanslutningen säkras med 16 A trög.
Var vänlig ange följande data vid förfrågningar:
• Motortillverkare
Motorns strömslag
Uppgifter på maskintypskylten
Uppgifter på brytartypskylten
Sänd alltid in den kompletta drivenheten med brytare vid
återsändning av motorn.
Such faulty power cords must not be used and are
a danger to life because of the damaged insulation!
Inspect the power cords for damage on a regular basis.
Make sure that during this inspection the power cord is
not connected to the mains supply.
The power cords must comply with the applicable VDE
(German Association for Electrical, Electronic and In-
formation Technologies) and DIN (German Institute for
Standardization) regulations. Only use power cords
marked as H05VV-F.
A type identication printed on the power cords is pre-
scribed.
AC Motor
The power supply should be identical with the marking
plate.
Extension cords must have a minimum conductor
cross section of 1.0 square millimetres.
The connection to the power supply must be protected
with applicable (delayed-action) fuse/ circuit breaker.
When you have questions, please include the following
details:
Motor manufacturer
Type of current
The details from the type plate of the machine
The details from the type plate of the switch
Always send back the whole drive unit including the
switch, when you return the motor.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Herkules DC1000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Herkules DC1000E in the language / languages: English, German, Swedish, Finnish as an attachment in your email.

The manual is 2.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info