782146
11
Zoom out
Zoom in
Previous page
1/44
Next page
11
that the voltage marked on the rating plate is the
same as your mains voltage.
If you need to use an extension cable, make sure
its conductor cross-section is big enough for the
equipments power consumption.
Minimum cross-section: 1.5 mm2.
If you use a cable reel, the complete cable has to
be pulled off the reel.
Check the power cable.
Never use a faulty or damaged power cable.
Do not use the cable to pull the plug out of the
socket.
Protect the cable from heat, oil and sharp edges.
Do not leave the machine in the rain and never use
it in damp or wet conditions.
Provide good lighting.
Do not saw near ammable liquids or gases.
Non-slip shoes are recommended when working
outdoors.
Wear a hair net if you have long hair.
Avoid abnormal working postures.
Operators have to be at least 18 years of age.
Trainees of at least 16 years of age are allowed to
use the machine under supervision.
Keep children away from the machine when it is
connected to the power supply.
Keep your workplace clean of wood scrap and any
unnecessary objects.
An untidy work area invites accidents.
Do not allow other persons, especially children, to
touch the tool or cable.
Keep them out of your work area.
Persons working on the machine should not be dis-
tracted.
Carry out conversions, adjustments, measurements
and cleaning jobs only when the motor is switched
off. - Pull out the power plug!
Before switching on, make sure that all keys and
wrenches have been removed from the tool.
Switch off the motor and pull out the power plug
before you leave the workplace.
Ret all guards and safety devices immediately af-
ter you have completed any repairs or maintenance
work.
Be sure to observe the safety information and op-
erating and maintenance instructions issued by the
manufacturer, as well as the dimensions listed in the
Technical Data.
It is imperative to observe the accident prevention
regulations in force in your area as well as all other
generally recognized rules of safety.
Note the information published by your professional
associations.
Do not use any low-powered machines for heavy
duty work.
Do not mis-use the cable Make sure you stand
squarely and keep your balance at all times.
Check that the moving parts are in good working
order, that they do not jam, and that no parts are
damaged.
Make sure that all parts are tted correctly and that
all other operating conditions are properly fullled.
Unless otherwise stated in the operating instruc-
tions, damaged safety devices and parts have to
be repaired or replaced by an authorized service
center.
ansluter den till utrustningen.
Kontrollera nätkabeln.
Använd inga olämpliga eller skadade nätkablar.
Dra inte i kabeln för att ta ut stickkontakten ur vägg-
uttaget.
Skydda kabeln mot värme, olja och vassa kanter.
Utsätt inte utrustningen för regn och använd den
inte i fuktig eller våt omgivning.
Se till att belysningen är tillräcklig.
Såga aldrig i närheten av brännbara vätskor eller-
gaser.
Vi rekommenderar att du bär halkfria skor om du
arbetar utomhus.
Bär hårnät om du har långt hår.
Undvik onormala kroppshållningar.
Användaren måste vara minst 18 år.
Personer som är i yrkesbildning kan vara minst 16
år, måste dock hållas under uppsikt.
Se till att inga barn vistas i närheten av utrustningen
om den har anslutits till nätet.
Se till att arbetsplatsen är ren från virkesavfall och
kringliggande delar.
Dålig ordning inom ditt arbetsområde kann föror-
saka olyckor.
Låt inga andra personer, särskilt barn, röra vid verk-
tyget eller nätkabeln.
Se till att dessa inte vistas i närheten av din ar-
betsplats.
Personer som arbetar vid utrustningen får inte dist-
raheras.
Bestyckning samt inställnings-, mätnings- och ren-
göringsarbeten får endast utföras om motorn har
kopplats ifrån. - Dra ut stickkontakten – Kontrollera
innan du kopplar in utrustningen att nycklar och in-
ställningsverktyg har tagits bort.
Koppla ifrån motorn och dra ut stickkontakten innan
du lämnar arbetsplatsen.
Se till att samtliga skydds- och säkerhetsanordning-
ar återmonteras omedelbart efter att reparation eller
underhåll har avslutats.
Beakta tillverkarens säkerhets-, arbets- och under-
hållsanvisningar samt de mått som anges i tekniska
data.
Beakta gällande arbetarskyddsföreskrifter och öv-
riga, allmänt erkända säkerhetstekniska regler.
Använd inga prestandasvaga maskiner för krävande
arbeten.
Använd endast kabeln till de ändamål den är av-
sedd för!
Se till att du står stabilt och alltid håller balansen.
Kontrollera att de rörliga delarna fungerar på avsett
vis och inte klämmer eller är skadade.
Samtliga delar måste vara rätt monterade och upp-
fylla alla krav för att garantera säker drift av verk-
tyget.
Skadade skyddsanordningar eller andra delar
måste repareras eller bytas ut av en auktoriserad
verkstad, såvida inte annat anges i denna bruks-
anvisning.
Låt en kundtjänstverkstad byta ut defekta brytare.
Detta verktyg uppfyller gällande säkerhetsbestäm-
melser.
Reparationer får endast utföras av en behörig elek-
triker, varvid original-reservdelar ska användas.
I annat fall nns det risk för att användaren kommer
till skada.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Herkules DC1000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Herkules DC1000E in the language / languages: English, German, Swedish, Finnish as an attachment in your email.

The manual is 2.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info