761786
82
Zoom out
Zoom in
Previous page
1/101
Next page
MY20H08-2_1.0_30.08.2019 82
Maintenance
The specialist dealer will fully inspect the
interior and exterior of the rear frame damper,
overhaul the rear frame damper, replace all air
seals on air forks, overhaul the air suspension,
change the oil and replace the dust wipers.
They will pay particular attention to rim and
brake wear. The spokes are re-tightened in
accordance with the findings.
8.1 Axle with quick release
8.1.1 Checking the quick release
Check the position and clamping force of the
quick release lever. The quick release lever
must be flush with the lower housing. You must
be able to see a slight impression on the palm
of your hand when you close the quick release
lever.
Figure 83: Adjusting the quick release clamping force
Use a 4 mm hexagon socket spanner to adjust
the clamping lever clamping force if required.
Afterwards, check the quick release lever
position and clamping force.
Figure 84: Adjusting the quick release clamping force
8.2 Adjusting the gear shift
If you cannot select the gears effortlessly, you will
need to adjust the setting for the shift cable
tension.
Carefully pull the adjusting sleeve away from
the shifter housing, turning it as you do so.
Check the gear shift function after each
adjustment.
Crash caused by unfastened quick
release
A faulty or incorrectly installed quick release may
become caught in the brake disc and block the
wheel. This will cause a crash.
Install the front wheel quick release lever on
the opposite side to the brake disc.
Crash caused by faulty or incorrectly
installed quick release
The brake disc becomes very hot during
operation. Parts of the quick release may become
damaged as a result. The quick release comes
loose. This will cause a crash with injuries.
The front wheel quick release lever and the
brake disc must be situated on opposite sides.
Crash caused by incorrectly set clamping
force
Excessively high clamping force will damage the
quick release and cause it to lose its function.
Insufficient clamping force will cause a
detrimental transmission of force. The
suspension fork or the frame may break. This will
cause a crash with injuries.
Never fasten a quick release using a tool (e.g.
hammer or pliers).
Only use the clamping lever with the specified
set clamping force.
CAUTION
!
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Panasonic Pedelec 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Panasonic Pedelec 2020 in the language / languages: English as an attachment in your email.

The manual is 12,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Panasonic Pedelec 2020

Hercules Panasonic Pedelec 2020 User Manual - German - 105 pages

Hercules Panasonic Pedelec 2020 User Manual - Dutch - 104 pages

Hercules Panasonic Pedelec 2020 User Manual - French - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info