761784
40
Zoom out
Zoom in
Previous page
1/87
Next page
MY21H05-2_1.0_30.11.2020 40
Operation
6.6.1.5 Adjusting the seat position
The saddle can be shifted on the saddle frame.
The right horizontal position ensures an optimal
leverage position for legs. This prevents knee
pain and painful incorrect pelvis positions. If you
have displaced the saddle more than 10 mm, you
need to adjust the saddle height again since both
settings affect one another.
To adjust the seat position safely, either push the
pedelec near to a wall, so that you can lean on the
wall to support yourself or ask another person to
hold the pedelec for you.
1Climb onto the pedelec.
2Place the pedals into the vertical position with
your feet.
The rider is sitting in the optimal sitting position if
the perpendicular line from the kneecap runs
through the pedal axle.
3.1If the perpendicular line crosses behind the
pedal, bring the saddle further forward.
3.2If the perpendicular line crosses in front of the
pedal, bring the saddle further back.
4Move the saddle within its permitted
displacement range only (marked on the
saddle stay).
Figure 25: Knee cap perpendicular line
6.6.2 Adjusting the handlebars
6.6.3 Adjusting the stem
6.6.3.1 Adjusting the height of the handlebars
1Open the stem clamping lever.
Figure 26: Open (2) and closed (1) stem clamping lever; All
Up used as an example
The handlebar settings must only be adjusted
while the bicycle is stationary.
Unfasten and adjust the designated screw
connections, and clamp them with the
maximum tightening torque for the clamping
screws of the handlebars.
90°
Crash caused by incorrectly set clamping
force
Excessively high clamping force will damage the
quick release and cause it to lose its function.
Insufficient clamping force will result in
unfavourable transmission of force. This can
cause components to break. This will cause a
crash with injuries.
Never fasten a quick release using a tool (e.g.
hammer or pliers).
Only use the clamping lever with the specified
set clamping force.
Crash caused by loose stem
Incorrectly fastened screws may come loose due
to impact. The stem may no longer be firmly fixed
in its position as a result. This will cause a crash
with injuries.
Check the handlebars and the quick release
system are firmly in position after the first two
hours of riding.
CAUTION
!
CAUTION
!
1
2
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Fazua Pedelec 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Fazua Pedelec 2021 in the language / languages: English as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Fazua Pedelec 2021

Hercules Fazua Pedelec 2021 User Manual - German - 92 pages

Hercules Fazua Pedelec 2021 User Manual - Dutch - 88 pages

Hercules Fazua Pedelec 2021 User Manual - French - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info