761785
80
Zoom out
Zoom in
Previous page
1/102
Next page
MY20H06-2_1.0_26.08.2019 80
Cleaning and servicing
7.4.4.2 Presta valve
It is recommendable to use a
bicycle pump with a pressure
gauge. The operating
instructions for the bicycle pump
must be adhered to.
Unscrew and remove the
valve cap.
Open the knurled nut around
four turns.
Carefully apply the bicycle
pump so that the valve insert is
not bent.
Pump up the tyre slowly and pay attention to
the tyre pressure in the process.
The tyre pressure has been adjusted as per the
specifications.
Remove the bicycle pump.
Tighten the knurled nut with your fingers.
Screw the valve cap tight.
Screw the rim nut gently against the rim with the
tips of your fingers.
7.4.4.3 Schrader valve
It is recommendable to use a
bicycle pump with a pressure
gauge. The operating
instructions for the bicycle pump
must be adhered to.
Unscrew and remove the
valve cap.
Connect the bicycle pump.
Pump up the tyre slowly and
pay attention to the tyre
pressure in the process.
The tyre pressure has been adjusted as per the
specifications.
Remove the bicycle pump.
Screw the valve cap tight.
Screw the rim nut gently against the rim with
the tips of your fingers.
7.4.5 Brake system
The maintenance interval for the brake depends on
the weather conditions and how frequent the
pedelec is used. If the pedelec is used under
extreme conditions such as rain, dirt or high
mileage, maintenance must be performed more
frequently.
7.4.6 Checking the brake linings for wear
Check brake linings after brake has been fully
applied 1,000 times.
Check that the brake linings are no less than
1.8 mm wide at any point and no less than
2.5 mm between the brake lining and
supporting plate.
Push brake lever and hold. In doing so, check
the transport safety wear gauge can fit
between the brake lining supporting plates.
The brake linings have not reached their wear
limit. If they have, a specialist dealer will need
to replace the brake linings.
7.4.7 Checking the pressure point
Push brake lever and hold several times.
If you are unable to clearly detect the pressure
point and it changes, a specialist dealer needs
to vent the brake.
1
Crash caused by brake failure
Worn brake discs and brake linings, as well as a
lack of hydraulic fluid in the brake cable, reduce
the braking power. This may cause a crash with
injuries.
Check the brake disc, brake linings and the
hydraulic brake system on a regular basis and
replace if necessary.
CAUTION
!
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Fazua Pedelec 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Fazua Pedelec 2020 in the language / languages: English as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Fazua Pedelec 2020

Hercules Fazua Pedelec 2020 User Manual - German - 102 pages

Hercules Fazua Pedelec 2020 User Manual - Dutch - 103 pages

Hercules Fazua Pedelec 2020 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info