Manual Hercules DJ Control steel (page 18 of 30) (English)

493447

Zoom out

Zoom in

1/30

18/30 – User Manual

Scratch button on your DJ Control Steel, the jog wheels switch to the seek function, allowing you

to move quickly within a track. You can also move quickly within a track using the backward and

forward buttons, just above the jog wheel. Press the Scratch button again to return to the default

scratch function.

Use the Pitch slider on Deck B to adjust the song's tempo to match that of the song on Deck A;

alternatively, you can press the Sync button on Deck B to match the tempo of the track on that

deck to the one on Deck A. Synchronizing the tempos makes it easier for dancers to maintain a

constant rhythm when switching from one song to another.

As the track on Deck B is playing, press the Play/Pause button on Deck B to pause the track at

the exact point where you wish to start playback: this pauses the song and sets the cue point

there (if you were to press the Stop button instead, the cue point would not be moved to the new

position; instead, it would go back to the track's original cue point, i.e. the start of the song).

As the track on Deck A is nearing its end, start moving the cross fader to the right towards Deck

B: the more you move it to the right, the more of Deck B will be heard in the mix. When you're

ready to start playback, press the Play/Pause button on Deck B to start playing the track from the

cue point where you had paused it. You can adjust the EQ knobs on Deck B to fine-tune the

equalization, or press one of the Kill buttons to cut out the corresponding frequency band on the

deck for an interesting transition effect (just press the Kill button again to restore the frequency in

question). Continue moving the cross fader until it's all the way to the right, at which point only

the track playing on Deck A will be heard in your mix. You can use the Volume slider on Deck B

to adjust the track's volume if necessary, so that it is at the same level as the track that had been

playing on Deck A.

Now that the track on Deck B is playing, you may want to return it to its original pitch if the pitch

has been altered to match what had been playing on Deck A. To do so, you can either press the

Reset button on Deck B, or slowly move the Pitch slider to adjust it to its normal level.

Feel like saying something to your audience over the music? Press the Mic On/Off button on

your DJ Control Steel to toggle the microphone on and address the crowd: the music level is

automatically reduced so that your voice can be heard. Use the Volume knob next to the

microphone input on the top face of your DJ Control Steel to adjust the microphone volume.

When you're done talking, press the Mic On/Off button again to switch off your microphone and

restore the music to full volume.

Have fun experimenting with some of the effects that are available on buttons 1-6: loop in, loop

out, pitch bend, flanger, beatgrid and so on. You'll be amazed at some of the incredible sounds

you can easily produce, customize and manipulate. You can even modulate the effect by turning

the jog wheel while keeping the effect button pressed down. Pressing buttons 1-6 toggles the

corresponding effect on or off.

While the music on Deck B is playing, press the Cue Select button on Deck A: this means that

Deck A is now monitored on your headphones.

Start playback and adjust the level using the Gain knob on Deck A, which allows you to set the

overall level to match that of the track playing on the other deck. Once the overall level has been

set, you can use the Volume slider for the deck to make more precise adjustments. Cue up your

track to the spot where you want playback to start.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hercules DJ Control steel in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules DJ Control steel

Hercules DJ Control steel User Manual - German - 30 pages

Hercules DJ Control steel User Manual - Dutch - 30 pages

Hercules DJ Control steel User Manual - French - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hercules DJ Control steel Manual

Product: