624504
14
Zoom out
Zoom in
Previous page
1/24
Next page
14/24 – User Manual
achieve the perfect gain for the piece being played on Deck B, if you haven’t done so already.
Naturally, there are many ways to switch from one piece to another: you can move the cross fader
slowly, create back-and-forth effects, etc. Just use your imagination! Once the cross fader is
pushed completely to the right, only what is being played on Deck B will be heard by the
audience. At this point you can either set the headphone output selector to the Mix position to
hear what is being played on Outputs 1/2 on your headphones, or temporarily remove your
headphones and just listen to the music over the speakers in the room.
The following diagrams give you an idea of how the Bass, Medium and Treble knobs and cross
fader are adjusted for the procedure described above.
Piece A being played on Deck A in the room. The
Bass, Medium and Treble knobs on Deck A are
adjusted for the perfect sound mix.
Switching from Deck A to Deck B (keep the cross
fader in the center position for approximately 5
seconds while you adjust the Bass, Medium and
Treble knobs on Deck A and Deck B).
Once the knobs are in their new positions, you can
move the cross fader all the way over to Deck B.
The transition between two pieces should be perfect thanks to the pitch synchronization carried
out previously. Should you notice a slight discrepancy, however, use the Pitch bend - / +
buttons. These buttons are the equivalents of the DJ giving a little push to the vinyl on his
turntable, or slowing down the deck with his hand. The pitch modification value increases the
more the Pitch bend button is pressed.
Let’s assume that you have a turntable connected to Inputs 1/2 (for Deck A), and that the next
track you want to play is on a standard vinyl record on Deck A.
While the track on Deck B is playing, set the headphone output selector on the DJ Console Mk2’s
front face to the Deck A position so that you can monitor Deck A (the left-hand deck) while you
are getting your next track ready. Press the audio source select button on Deck A so that the
LED is off, indicating that Deck A is in Input mode. Cue up the record on your turntable
connected to Deck A to the spot where you want the music to start playing.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules DJ Console MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules DJ Console MK2 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules DJ Console MK2

Hercules DJ Console MK2 User Manual - German - 24 pages

Hercules DJ Console MK2 User Manual - Dutch - 24 pages

Hercules DJ Console MK2 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info