624399
24
Zoom out
Zoom in
Previous page
1/38
Next page
10.5. Pitch settings
- 2 or 4 Pitch faders (sliders): you can use the pitch faders to adjust the playback speed of a
track, increasing or reducing its BPM (Beats Per Minute) rate, in order to make dancing easy
by setting new music tracks at the same BPM as the previous track so that dancers don’t need
to change their rhythm during the transition from one track to another. The pitch faders feature
14-bit accuracy.
When you switch between 2 decks (between A and C, or between B and D), the
software takeover function requires that you reach the same fader position with your hardware
volume fader (in this case, the pitch fader on your DJ 4Set controller) as indicated in the
software, before you are able to control the volume in the software with the hardware fader.
- Pitch Bend (- and +): you can use these buttons to temporarily increase or decrease the
playback speed of a track. Adjustments made in this way are “elastic” adjustments, in that they
are only temporary, and are no longer applied once the button is released.
- Sync: pushing this button synchronizes the speed (BPM) of the music played on the
corresponding deck to match the BPM rate of the music on the other deck.
In general, adjusting the pitch changes the music’s speed and tone: faster means a higher tone,
slower means a lower tone.
10.6. Shift button (for loops/cue/sampler/effects), and buttons
1-3
DJ 4Set provides the equivalent of 6 buttons per deck for effects, loops and Cue functions, thanks
to the Shift button, which converts buttons 1 to 3 on each deck into buttons 4 to 6. The default
functions are as follows: Button 1 = Loop In; Button 2 = Loop Out; Button 3 = Flanger; Button 4 =
Hot Cue 2; Button 5 = Beatgrid; Button 6 = Overloop (please note that Overloop may not be
available on Mac).
You can also assign the following effects to buttons 1-6: Loop In; Loop Out; Sampler Record;
Sampler Play; Hot Cue 1 (= Cue point 1); Hot Cue 2 (= Cue Point 2); Pitch Bend – (minus); Pitch
Bend + (plus); Pitch Reset; Beatlock; Master Tempo; Flanger; Beatgrid; FlippinDouble; Overloop;
Backspin; Brake; Echo.
10.7. Load / buttons
Use these buttons to load the highlighted music track in the VirtualDJ 7 LE 4Set software on the
corresponding deck.
24/30 – User Manual
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules DJ 4Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules DJ 4Set in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules DJ 4Set

Hercules DJ 4Set User Manual - German - 38 pages

Hercules DJ 4Set User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info