761779
36
Zoom out
Zoom in
Previous page
1/102
Next page
MY20H01-22_1.0_28.05.2019 36
Assembly
5 Assembly
Assemble the pedelec in a clean, dry
environment.
The work environment temperature should be
between 15 °C and 25 °C.
If a fitting stand is used, it must be approved for a
maximum weight of 30 kg.
We recommend that you always disconnect the
battery from the pedelec when using the fitting
stand to reduce weight.
5.1 Required tools
The following tools are required to assemble the
pedelec:
•Knife
Hexagon socket spanner 2 (2.5 mm, 3, mm
4 mm, 5 mm, 6 mm and 8 mm)
Torque wrench with working range between
5and 40Nm
Twelve-point square socket T25
Ring spanner (8 mm, 9 mm, 10 mm, 13 mm,
14 mm and 15 mm) and
Cross, flat head and ordinary screwdriver.
5.2 Unpacking
The packaging material consists mainly of
cardboard and plastic film.
The packaging has to be disposed of in
accordance with the regulations of the
authorities.
5.2.1 Scope of delivery
The pedelec was completely assembled in the
factory for test purposes and then dismantled for
transportation.
The pedelec is 95–98% pre-assembled. The
scope of delivery includes:
the pre-assembled pedelec
the front wheel
the pedals
quick release (optional)
the charger
the operating instructions.
The battery is supplied separately from the
pedelec.
Injury to the eyes
Problems may arise if the settings are not made
to components properly and you may sustain
serious injuries as a result.
Always wear safety glasses to protect your
eyes during assembly.
Crushing caused by unintentional activation
There is a risk of injury if the drive system is
activated unintentionally.
Remove the battery if it is not absolutely
necessary for assembly
Work environment temperature 15 °C - 25 °C
Table 31: Work environment temperature
WARNING
!
CAUTION
!
Hand injuries caused by cardboard packaging
The shipping carton is closed with metal staples.
There is a risk of puncture wounds and cuts when
unpacking and crushing the packaging.
Wear suitable hand protection.
Remove the metal staples with pliers before
the shipping carton is opened.
CAUTION
!
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Brose Topology Pedelec 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Brose Topology Pedelec 2020 in the language / languages: English as an attachment in your email.

The manual is 11,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Brose Topology Pedelec 2020

Hercules Brose Topology Pedelec 2020 User Manual - German - 105 pages

Hercules Brose Topology Pedelec 2020 User Manual - Dutch - 101 pages

Hercules Brose Topology Pedelec 2020 User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info