761552
80
Zoom out
Zoom in
Previous page
1/94
Next page
MY20H01-12_1.0_28.05.2019 80
Troubleshooting, fault clearance and repair
9 Troubleshooting, fault clearance
and repair
9.1 Troubleshooting and fault
clearance
The components of the drive system are checked
constantly and automatically. If an error is
detected the corresponding error code will appear
on the display screen. Depending on the type of
error, the drive will also be automatically switched
off.
9.1.1 The drive system or display
do not start up
If the display and/or the drive system do not start up,
proceed as follows:
Check whether the battery is switched on. If
not, start the battery.
Contact specialist dealer if the battery level
indicator LEDs do not light up.
If the LEDs on the battery level indicator light
up, but the drive system does not start up,
remove the battery.
Insert the battery.
Start the drive system.
If the drive system does not start up, remove
the battery.
Clean all the contacts with a soft cloth.
Insert the battery.
Start the drive system.
If the drive system does not start up, remove
the battery.
Fully charge the battery.
Insert the battery.
Start the drive system.
If the drive system does not start up, remove
the display.
Fasten the display.
Start the drive system.
Contact your specialist dealer if the drive
system does not start up.
9.1.2 Error messages
If an error message is displayed, run through the
following actions:
Make a note of the system message.
Shut off and re-start the drive system.
If the system message is still displayed,
remove and then re-insert the battery.
Re-start the drive system.
If the system message is still displayed,
contact your specialist dealer.
Risk of fire and explosion due to faulty battery
The safety electronics may fail if the battery is
damaged or faulty. The residual voltage can
cause a short circuit. Batteries may self-ignite and
explode.
Batteries with external damage must be
removed from service immediately.
Never allow damaged batteries to come into
contact with water.
If a battery is dropped or struck but shows no
signs of external damage, remove it from
service and observe it for at least 24 hours.
Faulty batteries are hazardous goods.
Dispose of faulty batteries properly and as
quickly as possible.
Store in a dry place until disposal. Never store
in the vicinity of flammable substances.
Never open or repair the battery.
WARNING
!
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Brose 14d Pedelec Display 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Brose 14d Pedelec Display 2020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Brose 14d Pedelec Display 2020

Hercules Brose 14d Pedelec Display 2020 User Manual - German - 93 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - Dutch - 92 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - French - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info