761552
50
Zoom out
Zoom in
Previous page
1/94
Next page
MY20H01-12_1.0_28.05.2019 50
Operation
6.3.6.1 Adjusting the negative deflection
Negative deflection (sag) is compression of the
fork caused by the weight of the rider and their
gear (e.g. a backpack), the sitting position and the
frame geometry. This sag is not caused by riding.
Each rider has a different weight and sitting
position. The sag depends on the rider's position
and weight and should be between 15% and 20%
of the maximum fork deflection, depending on
pedelec usage and preferences.
When adjusting the sag, ensure that each
compression adjuster is in the open position, i.e.
turned clockwise until it stops.
The pressure is to be measured at an ambient
temperature of 21 to 24 °C.
The air valve is located under a blue cover on
the head of the left shock absorber. Screw off
the cover anti-clockwise.
Place a high-pressure pump on the valve.
Pump the suspension fork up to the desired
pressure. Never exceed the recommended
maximum air pressure. Comply with the values
of the filling pressure table.
Remove the high-pressure pump.
Measure the distance between the crown and
the dust wiper of the fork. This distance is the
"total deflection of the fork."
Push the O-ring downward against the dust
wiper of the fork. If an O-ring is not available,
attach a cable tie to the stanchion temporarily.
Put on your usual bicycling clothing, including
baggage.
Sit on the pedelec in your usual riding position
and support yourself (e.g. against a wall or
tree).
Get off the pedelec without allowing it to
deflect.
Measure the distance between the dust wiper
and the O-ring or cable tie. This dimension is
the sag. The recommended sag value is
between 15% (hard) and 20% (soft) of the
"total fork deflection."
Increase or reduce the air pressure until you
have reached the desired sag.
Once the sag is correct, re-tighten the blue air
cover cap clockwise.
6.3.6.2 Adjusting the rebound
The rebound defines the speed at which the fork
rebounds after being loaded. The rebound setting
depends on the air pressure setting. Higher sag
settings require lower rebound settings.
Turn the rebound adjuster clockwise to the
closed position until it stops.
Figure 54: FOX rebound adjuster (1) on the fork
Turn the rebound adjuster anti-clockwise.
Adjust the rebound in such a way that the fork
rebounds quickly, but without bottoming out
Rider weight Rhythm 34 Rhythm 36
Minimum air
pressure
40 psi (2.8 bar) 40 psi (2.8 bar)
54 - 59 kg 58 psi 55 psi
59 - 64 kg 63 psi 59 psi
64 - 68 kg 68 psi 63 psi
68 - 73 kg 72 psi 67 psi
73 - 77 kg 77 psi 72 psi
77 - 82 kg 82 psi 76 psi
82 - 86 kg 86 psi 80 psi
86 - 91 kg 91 psi 85 psi
91 - 95 kg 96 psi 89 psi
95 - 100 kg 100 psi 93 psi
100 - 104 kg 105 psi 97 psi
104 - 109 kg 110 psi 102 psi
109 - 113 kg 114 psi 106 psi
Max. pressure 120 psi (8.3 bar) 120 psi (8.3 bar)
Table 32: Filling pressure table of the FOX air fork
If you cannot achieve the desired sag, you may
need to make an internal adjustment. For this
purpose, contact your specialist dealer.
1
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Brose 14d Pedelec Display 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Brose 14d Pedelec Display 2020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Brose 14d Pedelec Display 2020

Hercules Brose 14d Pedelec Display 2020 User Manual - German - 93 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - Dutch - 92 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - French - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info