761552
32
Zoom out
Zoom in
Previous page
1/94
Next page
MY20H01-12_1.0_28.05.2019 32
Assembly
5.3 Commissioning
Only trained specialist staff may perform initial
commissioning since initial commissioning of the
pedelec requires special tools and specialist
knowledge.
Experience has shown that a pedelec which has
not yet been sold is automatically handed to end
users as soon as it appears ready to ride.
For this reason, every pedelec must be
prepared, so that it is fully ready for use
immediately after being assembled.
All assembly work described in the assembly
report (see appendix) must be performed to
ensure the pedelec is ready to ride. It
describes all safety-relevant inspections, tests
and maintenance tasks for the pedelec in a
separate list.
Complete an assembly report for quality
assurance purposes.
5.3.1 Checking the battery
The battery must be checked before it is charged
for the first time.
Press the On-Off button (battery).
If none of the LEDs on the operating status and
battery level indicator light up, the battery may
be damaged.
The battery can be charged if at least one of
the LEDs on the operating status and battery
level indicator is fully lit up, but not if all of them
are.
Once the battery has been charged, insert it
into the pedelec.
5.3.2 Mounting the wheel in the Suntour
fork
Only applies to pedelecs with this equipment
5.3.2.1 Mounting the wheel with screw-on axle
(15 mm)
Insert the axle completely on the drive side.
Figure 20: Fully inserting the axle
Risk of fire and explosion due to incorrect
charger
Batteries which are recharged with an unsuitable
charger may become damaged internally. This
may result in fire or an explosion.
Only ever use the battery with the supplied
charger.
Mark the supplied charger clearly to prevent
mix-ups – with the pedelec frame number or
type number, for example.
Burns from hot drive
The drive cooler can become extremely hot
during use. Contact may cause burns.
Leave the drive unit to cool before cleaning.
CAUTION
!
Risk of fire and explosion due to faulty battery
The safety electronics may fail if the battery is
damaged or faulty. The residual voltage can
cause a short circuit. The battery may self-ignite
and explode.
Never charge a faulty battery.
WARNING
!
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Brose 14d Pedelec Display 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Brose 14d Pedelec Display 2020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Brose 14d Pedelec Display 2020

Hercules Brose 14d Pedelec Display 2020 User Manual - German - 93 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - Dutch - 92 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - French - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info